Complaint
High Quality Small Size Monel 401 Nickel Based Alloy Tube for Bimetal contacts
MONEL alloys are solid solution alloys that can be hardened by subjecting them to cold working. There are different types of MONEL alloys available commercially, namely, MONEL 400, 401, 404, R-405, 450 and K-500. The standard forms of MONEL alloy are hexagon, flats, forging stock, tube and pipe.
MONEL 401 is designed for use in special electric and electronic applications. The common forms of MONEL 401 alloy are strip and wire. This datasheet will look into the chemical composition, properties and applications of MONEL 401 alloy.
| Material | Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy |
| Shape | Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet |
| Grade | Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L |
| Others:253Ma,254SMo,654SMo,F50(UNSS32100)F60,F61,F65,1J22,N4,N6 etc | |
| Alloy : Alloy 20/28/31 | |
| Hastelloy:HastelloyB/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g | |
| Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617,Hastelloy C, Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602, Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665 | |
| Haynes: Haynes 230/556/188 | |
| Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20 | |
| Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851, Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816 | |
| Incoloy: Incoloy 800/800H/800HT/825/925/926; | |
| GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044 | |
| Monel: Monel 400/K500/R405 | |
| Nitronic: Nitronic 40/50/60; | |
| Nimonic: Nimonic 75/80A/90/A263 ; | |
| Specification | Wire: 0.01-10mm Strip: 0.05*5.0-5.0*250mm Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm |
| Product Characteristics | 1.According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys. 2.According to the strengthening mode, there are solid solution strengthening type, precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc.. |
| Standard | GB,AISI,ASTM,DIN,EN,SUS,UNS etc |
| Inspection | ISO,SGS,BV and so on. |
| Application | High temperature components such as turbine blades, guide vanes, turbine disks, high pressure compressor disks,machine manufacturing and combustion chambers used in the manufacture of aviation, naval and industrial gas turbines |
| Packaging | 1. cases packed in wooden cases 2. paper packaging 3. plastic packing 4. foam packaging Packaging according to customer requirements or products |
| Delivery | 7-25days orAccording to the product |
| Payment | L/C,D/A,D/P,T/T,Western Union,MoneyGram,According to customer requirements payments for offline orders. |
The chemical composition of MONEL 401 alloy is given in the following table.
| Element | Content (%) |
|---|---|
| Nickel, Ni | 40 - 45 max |
| Copper, Cu | Remainder |
| Manganese, Mn | 2.25 max |
| Iron, Fe | 0.75 max |
| Silicon, Si | 0.25 max |
| Cobalt, Co | 0.25 max |
| Carbon, C | 0.10 max |
| Sulfur, S | 0.015 max |
The following table discusses the physical properties of MONEL 401 alloy.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.89 gm/cm3 | 0.319 lb/in3 |
The mechanical properties of MONEL 401 alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength(annealed) | 441 MPa | 64 ksi |
| Yield strength | 134 MPa | 19 ksi |
Some of the other designations that are used to denote MONEL 401 alloy are as below:-
Conventional machining techniques used on iron alloys may be used for this alloy.
Alloy 401 is readily autogenously welded into thin sections. Gas-tungsten-arc welding is the commonly used procedure. Resistance welding is a satisfactory method for this alloy.
May be hot worked if needed.
Cold working may be done using standard tooling and soft die materials for better finish.
MONEL 401 alloy should be annealed at 760°C (1400°F) for one hour for recovery from cold working.
The MONEL 401 alloy is used in the following applications:
