Model | LS-100 |
Generator | Hairun 2.8KW Diesel engine unit |
Crack sealing pressure | 2Mpa |
Volts | 220V |
Power | 2.8KW |
Speed | 3600r/min |
Output speed | 8-15L/min |
The length of electric heating tube | 5m |
Stirring Method | Electric stirring |
Hot melt kettle volume | 100L |
Moving method | Hand push or pull |
Combustor | Ltalian Riello 445T1 combustor |
Temperature control system | Automatic control by SLA5000 intelligent digital temperature controller |
Heating method | Conduction oil indirect heating |
Filling material heating time | About 30 minutes |
Temperature range | 0-230ºC |
Size | 2000*1000*1300 mm |
Weight | 400kg |
Power | 5kw |
Tank volume | 3.1L |
Distributing capacity (flow) | 18L/min |
Distributing pressure | 1 mpa |
Hydraulic pump | gear type |
The front wheel diameter | 250 mm |
Fuel | vehicle-use unleaded gasoline |
Lubricating oil | 10W-30W(above SE level ) |
The lubricating oil capacity | 0.58 L |
Start the way | recoil start way |
Spraying width | 500-1000mm |
Size | 1100*540*860mm |
weight | 68KG |
The nozzle type | Stainless steel no.8 |
Tube length | 5m |
Generator | Honda GX160 |
Article number | LS-310 |
Model | LS-80L |
Size | 1370*980*1200mm |
Weight | 165kg |
Engine | YAMAHA generator set ET-7, 650w,220V |
Heating style | Combustion of liquefied gas, heating furnace indirectly heating oil + built-in flue, two heating. |
The first heating time | 30 to 50 min |
Walking Way | Hand push |
Filling style | 250w Electronic stepless speed regulating pump and automatic constant temperature electric heating tube, pressure output. |
Application | asphalt and sealant. |
Model | LS-500 |
Generator | 4 cylinder diesel engine |
Crack sealing pressure | 2Mpa |
Volts | 220V |
Power | 5KW |
Speed | 3600r/min |
Output speed | 8-15L/min |
The length of electric heating tube | 7m |
Stirring method | Electric stirring |
Hot melt kettle volume | 500L |
Moving method | Hand push or pull |
Combustor | Ltalian Riello 445T1 combustor |
Temperature control system | Automatic control by SLA-5000 intelligent digital temperature controller |
Heating method | Conduction oil indirect heating and extemal oil pump circulating heating |
Filling material heating time | About 30 minutes |
Temperature range | 0-280ºC |
Size | 3900*1740*2100 mm |
Weight | 1850KGS |