T95 Alumina Ceramic Curved Wear Plates Without Holes Used in Mining Industry

Min.Order: 1
Product origin: Zibo, Shandong, China
Infringement complaint: complaintComplaint
US$ 1100 ~ 1101

Description


Product Description

              T95 Alumina Ceramic Curved Wear Plates Without Holes Used in Mining Industry

1. Detailed description
 

The Ceramic tiles is a high-performance abrasion and impact resisting linings for high-impact, high-pressure applications in which ceramic tile may not have sufficient structural resistance, and high-performance rubber may not offer the required wear life. In extreme applications, the Cube liners can be installed in a matrix or abrasion resistant steel plate to provide structural support for the ceramic/rubber matrix and provide exceptional wear life where competing products cannot.

Used in heavy industry for years as a cost-effective, wear-resistant solution, these lightweight materials offer high durability, strength, and excellent abrasion and corrosion resistance. Alumina wear resistant compositions include:
l Alumina 92: most common wear product with great wear resistance
l Alumina 95: increased wear performance
l Alumina T95: premium alumina for best wear resistance
l Zirconium toughened alumina(ZTA):  increased strength and impact resistance

2.Product features:
> High hardness 
> Superior abrasion and impact resistance 
> Corrosion and chemical resistance 
> Light weight 
> Easy installation by epoxy resin or bolt 
> Improve your working environment-noise, vibration and safety

3. Product Specification:
- Square tile: 10x10x3~10mm, 17.5x17.5x3~15mm, 20x20x3~15mm, etc.
- Ceramic Plate: 100x100x6~50mm, 150x100x6~50mm, etc.
- Hexagonal tile: S12.5xT3~20mm, S23.5xT6-25mm
- Dimple tiles: 20x20x4-10+1(with 5 dimples), 20x30x5~15+1(with 18 dimples), 20x20x5-10mm( with 13 dimples)
- Ceramic Block: 40x40x40mm, 45x45x50mm,32x32x22mm, 38x38x38mm,etc.
- Ceramic Cylinder/rod: 6x6mm,15x15mm,20x20mm, 31x31mm,40x40mm, 45x50mm, 50x50mm etc.

5. Ceramic wear lining tiles for a variety of applications:

Processing equipment:
l Pharmaceutical clean rooms
l Food processing plants
l Grain handling
l Mineral processing
l Cement manufacturing
l Chemical processing
l Large Cyclones:
l Coal-fired power plants
l Steel Mills
l Asphalt Plants
l Petrochemical plants
l Pulp and paper mills
Detailed Photos

 

 

 

Product Parameters

 

CategoryHC90HC92HC95HCT95HC99HC-ZTAZrO2
Al2O390%≥92%≥95%≥ 95%≥ 99%≥75%/
ZrO2/////≥21%≥95%
Density>3.50g/ cm3>3.60g/cm3>3.65g/cm3>3.70g/cm3>3.83g/cm3>4.10g/cm3>5.90g/cm3
HV 2090095010001100120013501100
Rock Hardness HRA80828588909088
Bending Strength MPa180220250300330400800
Compression strength MPa97010501300160018002000/
Fracture Toughness KIc MPam 1/23.53.73.84.04.24.57.0
Wear Volume≤0.28 cm3≤0.25cm3≤0.20cm3≤0.15cm3≤0.10 cm3≤0.05cm3≤0.02cm3
 
Company Profile

Qimingxing offer quality wear and Ant- impact ceramics, in combination with our experienced and competent staff, ensure the increased efficiency and service life of all equipments and materials to which they are applied. - Established Ultrafine Energy Efficiency Technology Research Institute - Increase lifespan of wearable parts - New improved technology and products - Minimal downtime to minimize delays in production - Variety of wear combating options available as a one stop solution - Strong focus on product innovation supported by Chinese Academy of Sciences. - Customized application techniques to suite any wear problem

Certifications

 

Packaging & Shipping

 

OTHER HOT SALE

 

More Abrasion ceramics products : abrasion ceramics , Alumina ceramics , wear resistant ceramics , alumina pipe liner , ceramic tube , alumina cylinder pipe , wear resistant alumina plate , abrasion ceramic tile , abrasive alumina sheet , friction plain tile , abrasion weldable tile , rubber backed ceramic liner , ceramic composite linings , alumina mosaic sheet , ceramic taper tile for pipe sleeve , ceramic ladder tile for pipe steel , engineering  ceramics equipment , pre-fabricated pipe sleeve ,wear resistant bending pipe , abrasion materials

FAQ

FAQ


Q: What is your experience in your products?
A: We have 22 years experience in this industry line. We are professional manufacturer in this area.
 
Q: What is your MOQ?
A: The MOQ is different as per different products, for example, 1 Ton for ceramic ball.
 
Q: Can you accept small quantity sample order before production?
A: Yes, we can offer sample for your testing first.

Q: Can you provide free sample?
A: Yes, within 1kg.
 
Q: What is your production time?
A: We have large stock for standard products. Normally within 7-10days after receipt the deposit.
 
Q: What are your payment terms?
A: T/T, L/C, Western Union 

 

 

 


Product Tag:
Related categories:
Scroll to Top