Mixing and granulating machine from the eighties China's chemical, pharmaceutical, food and other industries used in the preparation of new technology, the machine can not only mix and granulation in one, and the more prominent advantage is the rapid mode of operation.
Mixing granulator compared with the traditional granulation process, the advantages of its performance in.
(1) The amount of binder required for granulation is small, thus the drying time is short.
(2) The granulation can be done according to the existing formula without changing any process.
(3) The granulation time is only 7-10 minutes per batch.
(4) The grain boundary of the particles is clear, nearly spherical, uniform, small particle size and low density, thus good
fluidity when pressing, easy to fill the mold cavity, low pressure, stable weight of the tablets, and reduce labor intensity.
(5) The particles are small, and the grain boundaries of the particles are not destroyed when stamping, so it is easy to dissolve and diffuse.
(6) The surface of the sheet is smooth and fine.
(7) The granules made are looser than extruded granules and tighter than boiling granules.
The GHL high-speed mixing granulator is the result of improvement based on the introduction of similar products, it has the
advantages of easy operation and streamlined process, the resulting particles are between 16~80 mesh, and the whole granulation process can be completed in just a few minutes. The binder used abroad belongs to resin type organic solvent, while most of our pharmaceutical industry uses precipitated fen type binder, we have four types of ammonium sulfonate, vitamins, antibiotics, compounding and other 10 drugs for granulation and compression, using 10%, 13%, 15%, 18% of a variety of different proportions of precipitated fen pulp and different concentrations of organic solvents for the binder test, the granules produced excellent performance The quality of the pellets produced met the requirements.