Standard Laboratory Soil Medicine Sand Testing Sieve Machine
test sieve shaker is recommended for general laboratory use and for the fine sieving of particles size.
Please note that: a. Turn off power supply when the machine is not in use for an extended period of time. b. Clean the sieves after operation, so they will be ready for use next time. c. Do not splash water on the machine to avoid current leakage. d. Turn the machine off immediately in the event of unusual noises and inspect for blockage or other irregularities. e. Always ensure the lock nut is securely tightened before operation.
Technical Parameters
Number
Name
Unit
Data
1
layers
layer
1-8
2
diameter
mm
200
3
granularity
mm
0.038-3
4
noise
dB
50
5
feed capacity(once)
g
200
6
amplitude
mm
5
7
voltage
v
220
8
speed
r/min
1400
9
power
KW
0.12
10
overall dimension
mm
360*300*736
11
weight
Kg
37
Does your sieve testing process sound like this? 1. You pour the sample into the top sieve, clamp the stack and turn on the shaker. 2. The shaker is finish 3. You clean each sieve and weigh the results. 4. Now you divide the weight of the sample retained in each sieve by the total weight to get % retained. 5. This process can take 10-15 minutes for a stack of 9 sieves.
If you need one set of Stainless Steel Lab Grain Test Sieve, please let's know the following requirements: 1. How many sieves you need at once 2. The mesh size of each sieves 3. Please suggest the voltage in your plant