IEC 584-1 Thermalcouple Alloys Type K 0.5mm Diamater for Temperature Sensor

Min.Order: 1
Product origin: Changzhou, Jiangsu, China
Infringement complaint: complaintComplaint
US$ 10 ~ 45

Description
IEC 584-1 Thermalcouple Alloys type K 0.5mm diamater for temperature sensor

Platinum-rhodium thermocouple wire
 Non-insulated fine diameter, single wire and pair wire, ultra-high temperature resistant
 Types S, R and B
 R-type and S-type temperature range 1398 ~ 1482°C (2550 ~ 2700°F)
 Type B is suitable for continuous use at temperatures up to 1704°C (3100°F)
 To effectively prevent oxidation and corrosion at high temperatures, DLX offers high-quality uninsulated thermometer wires that can be applied to 3 types of "precious metal" thermocouples:
 Type S: Platinum (-) and Platinum 10% Rhodium (+)
 Type R: Platinum (-) and Platinum 13% Rhodium (+)
 Type B: Platinum 6% Rhodium (-) and Platinum 30% Rhodium (+)
 Types R and S are recommended for continuous use in oxidizing or inert atmospheres at temperatures up to 1398°C (2550°F), or short-term exposure to high temperatures up to 1482°C (2700°F). Type B is suitable for continuous use in oxidizing or inert atmospheres up to 1704°C (3100°F). When working close to the maximum temperature, it is recommended to use a larger wire diameter.
 All 3 types of thermocouples can be used in a vacuum environment for short periods of time. Type B provides the best stability when applied in a vacuum environment. All 3 models are not suitable for use in reducing gases or environments containing metallic or non-metallic vapors unless a non-metallic protective sleeve is used. Never insert thermocouples directly into metal protective sleeves.
 Wire diameters range from 0.025 to 0.812 mm (0.001 to 0.032"). If desired, thermocouple wires can be supplied in pairs that meet or exceed standard error limits. Special error limit wires are available on request and must be paired order.

Materialmelting pointResistivity
Pure Rhodium(99.99%)196312.44
Pure Platinum(99.99%)177221.45
Pt-Rh6%183020.7
Pt-Rh10%186019.8
Pt-Rh20%190518.8
Pt-Rh30%192717.6
Specification: 0.015~41.2(mm) in round wire, strip: 60.1~0.5(mm)
Application: Gas sensor. All kinds of sensors, medical components. Electric level and heating probe, etc.

Product Parameters

Thermocouple Wire

CodeWires component of the thermocouple
+Positive leg-Negative leg
NNi-cr-si (NP)Ni-si-magnesium (NN)
KNi-Cr (KP)Ni-Al(Si) (KN)
ENi-Cr (EP)Cu-Ni<constantan> (EN)
JIron (JP)Cu-Ni<constantan> (JN)
TCopper (TP)Cu-Ni<constantan> (TN)
BPlatinum rhodium-30%Platinum rhodium-6%
RPlatinum rhodium-13%Platinum
SPlatinum rhodium-10%Platinum

Standards

ASTMANSIIECDINBSNFJISGOST
(American Society for Testing and Materials) E 230(American National Standard Institute) MC 96.1(European Standard by the International Electrotechnical Commission 584)-1/2/3(Deutsche Industrie Normen) EN 60584 -1/2(British Standards) 4937.1041, EN 60584 - 1/2(Norme Française) EN 60584 -1/2 - NFC 42323 - NFC 42324(Japanese Industrial Standards) C 1602 - C 1610(Unification of the Russian Specifications) 3044
Theoretical weight per meter of precious metal wire (g/m)
DiametermmPtAuAgPtRh6PtRh10PtRh30
3151.7136.474.11   145.2141.4124.5
2.9141.8127.569.26135.7132.1116.3
2.8132.1108.964.57126.6123.1108.4
2.7122.8110.560.03117.75114.5100.84
2.6114102.455.67109.1106.293.48
2.5105.394.7551.47100.998.1786.44
2.497.0787.3247.4392.9690.2378.66
2.389.1780.2143.5785.3983.173.16
2.281.5673.3639.8678.1176.0266.94
2.174.3266.8536.3271.1769.2660.98
267.4360.6432.9564.5762.8455.33
1.960.8454.7329.7358.2656.749.92
1.854.6149.1126.6852.2950.8944.8
1.748.7143.8120.846.6545.3939.96
1.645.4138.8121.0841.3140.2135.96
1.537.9234.1118.8336.3235.3431.12
1.433.0429.7216.1431.6330.7927.11
1.328.4815.6313.9227.2826.5523.37
1.224.2821.8411.8623.2522.6219.92
1.120.3918.349.9719.5319.0116.73
116.8615.168.2416.1415.713.83
0.913.6612.286.6713.0712.7511.2
0.810.789.75.2710.3310.068.85
0.78.267.434.047.917.686.78
0.66.075.462.965.826.654.98
0.54.223.82.064.033.923.45
0.42.712.431.322.582.532.21
0.31.521.370.741.451.421.24
0.20.6750.6070.330.650.630.55
0.10.1690.1520.080.160.160.14
0.090.1360.123    
0.080.1080.097    
0.070.0830.075    
0.060.0610.055    
0.050.0420.038    
0.040.0270.024    
0.030.0150.014    
0.020.00680.0061    
Resistivity21.4619.310.4920.552017.61
 

Detailed Photos

In coil or DIN Spool,in carton or wooden case
DIN 100, DIN 125, DIN 160, DIN 200, DIN 250, DIN 355
Make electrodes.

Thermocouple manufacture. PtPh10/Pt thermocouple is the most accurate thermocouple for temperature measurement above 300°C, and it is also the international temperature benchmark in the range of 630.74~1064.43°C. Generally, the temperature can reach 1350°C (short-term 1600°C) PtPh30/PtPh6.PtPh13/Pt.PtPh20 /PtPh5. Thermocouples such as PtPh40/PtPh20 can measure higher temperatures.

In the glass industry, it is used to make heat-resistant and corrosion-resistant devices such as crucibles, drain plates, stirrers and electrodes.

It is used as a catalyst in ammonia oxidation and many other reactions.

It can be used as a high temperature heating element. The furnace with PtPh40 alloy as the heating element can work up to 1800 ºC in an oxidizing atmosphere.

Company Profile

Over the years, we have worked hard to promote and realize the modernization of alloy sales, and actively cultivated and enhanced the ability of employees' independent innovation. All-round renovation and upgrade of the original business site, facilities and equipment, and modern computer management. Hope to establish long-term partnerships and win market reputation.

We are increasing thescale of trade and customers through out the world. With our good reputation we have won the trust of our customers. It's helps the modernisation of our country and promote the economic and technical exchanges with the rest of the world. We also look forward to enhance the friendship with other countries and make positive impact.

We warmly hope that you and us together, hand in hand, create a glorious future.

DLX alloy, which is a alloy factory more than 18 years, we are founded in 2002, and run business with resistance alloy first. And in past 20 years, we R&D new product such as Thermocouple alloy,inconel, monel, hastelloy, high temperature alloy and other nickel based alloy products. 


 

Our Advantages

 

What is your working time?

Monday-Friday : 8:30AM-17:00PM (Beijing time, GMT+08.00)

We have public holiday during May.1-3, Oct.1-7 and Chinese New Year holiday . Pls e-mail us during our holiday if u have any questions.

 

Do you provide free samples?

Yes, we can provide a free sample for testing,buyer should bear the shipping costs.

 

What is your payment terms?

T/T,L/C,D/A,D/P,Western Union,MoneyGram,Paypal

 

What is the lead time?

Usually sample lead time is 15 days after payment has been confirmed.

Product Tag:
Related categories:
Scroll to Top