Complaint
Product Introduction
The whole frame of the machine adopts the national standard material and the whole steel plate, the
quality is stable, the template and the whole machine are annealed, the plane and hole position on the frame is processed in the CNC machining center at one time, to ensure that the frame is firm and not deformed, the balance is good, the hole position and the plane is accurate;
Product Feture
1, the most energy saving mechanism, centralized heating, separate blowing bottle, save energy consumption;
2, double link bending arm mold closing structure design, simple and fast mold change, rapid mold change only 30 minutes;
3, constant temperature 120 degrees Celsius heating system, little influence by external temperature, rotating bottle blank heating, bottle embryo heat evenly,
4, the drying system adopts servo motor drive chain, the movement is stable, no shaking, low noise, the bottle blank heating is more uniform.
5, high pressure compensation locking mechanism, to ensure the quality of blowing bottle;
6, bottom die blowing mechanism, to ensure that the bottle bottom easy demoulding and cooling;
7. All parts of the equipment that can be opened are equipped with safety emergency protection devices to ensure safe production; Eliminate artificial unsafe factors;
8, bottle type setting parameters have 4 groups of memory function: easy to replace the mold
9. Special heating seat design to ensure no air leakage
10. Small fan cooling, sustainable bottle blowing, prolong the service life Pull rod quick discharge valve, rapid forming and stable quality
11. Mouth protection mechanism, cooling channel
12. Automatic feeding system and shortage alarm
13. Automatic bottle out system, can be connected to the conveyor belt, improve the degree of automation
14, exhaust fan can be adjusted according to the temperature of the heating box: ensure that the temperature of the heating box is kept in a certain temperature range.
Technical Parameter
ITEM | UNIT | HC-2-5L |
Number of cavity | cavity | 3 |
Theoretical Output | pcs/h | 2000-2200 |
Max. container volume | L | 5 |
Max. neck diameter | mm | 55 |
Max. container diameter | mm | 115 |
Max. container height | mm | 350 |
Mould Thickess | mm | 300 |
Mould stroke | mm | 200 |
Stretching stroke | mm | 228 |
Actual power consuming | kw | 98 |
Woking pressure | Mpa | 0.8 |
Low pressure consuming | Ltr/min | 2000 |
Blowing pressure | Mpa | 4.0 |
Power of main blower | kw | 97 |
Measurement of main blower | mm | 5800*2100*2100 |
Measurement of elecator | mm | 2060*1860*2550 |
Weight of main blower | kg | 7500 |
