HVE series heat pump vacuum evaporator | ||
model:HVE-P3000 | Daily processing capacity:MAX 2000L | Manufacturer: Liheda (Dongguan) environmental protection equipment |
Liheda (Dongguan) Environmental Protection Equipment Co., Ltd |
Sewage Treatment Equipment Based on the Combination of Heat Pump Technology and Vacuum Technology -- Heat Pump Low Temperature Evaporator |
1st Floor, Building 6, Songyuan Innovation Technology City, Junda West Road, Dongkeng Town, Dongguan City, Guangdong Province Wang Dewei 13829249131 |
Processing capacity of water-based liquid: | 3000L/24h |
Distillation chamber material (sewage contact): | SUS304(Available in 316 2205 2507) |
Cooling chamber material (distillate contact): | SUS304 |
Input power voltage: | 380V 50/60HZ Three phase four wire five wire system (grounding wire) 5.8KW |
Input compressed air: | Dry and clean compressed air above 5KG |
Sheet metal construction: | Carbon steel powder spraying |
Heating heat exchanger: | SUS316coil |
Evaporation type: | Heat pump low-temperature evaporation |
Evaporation conditions: | -0.92KPA-0.097KPA temperature25-40ºC |
Evaporation temperature: | 25-40ºC |
Steam separator: | SUS304Demister |
Heating and cooling technology: | Heat pump circuit |
Heat pump compressor: | vortex |
cryogen: | R22 |
Vacuum system: | Liquid ejector |
Operation control: | PLC and HMI intelligent control and 4G remote monitoring |
Noise: | 68dB (A) measured at 1M from the mechanical surface and 1.6M from the ground |
power supply | unit | 380V 50/HZ |
Maximum output of evaporation effluent | L/24h | 3000±10% |
Absorbed power | KW | 10.25±10% |
Heat generated by radiator | KW | 10.25±10% |
Air flow around radiator | Good ventilation | Heat dissipation |
Temperature at saturated evaporation | Sewage: 37 ºC± 10% Steam: 36 ºC± 10% Distillate temperature: 28 ºC± 10% |
Serial No | description | configuration | remarks |
1 | Foam inhibitor liquid shortage warning | Standard configuration | |
2 | Original liquid barrel | Optional | Standard configuration of suction reminder |
3 | Concentrate barrel | Optional | Optional concentration tank full reminder |
4 | Distillate barrel | Optional | Optional distillate full warning |
type | size(MM) | weight(KG) |
Unpacked | 2760*1800*2527 | 2345 |
Condition Type | Working conditions |
10-40ºC | Normal |
0ºC<temperature<10ºC | It is allowed to start. Precautions: prevent icing |
>40ºC | Get in touch with Liheda; |
Serial No | description | type | caliber | requirement |
1 | Liquid inlet to be treated | Reserved internal teeth | 1 inch internal tooth | |
2 | Concentrate discharge outlet | Reserved internal teeth | 1 inch internal tooth | |
3 | Defoamer inlet | Reserved air pipe orifice | 6 cm straight plug | |
4 | Distillate outlet | Reserved internal teeth | 6 internal teeth | |
5 | Tap water inlet | Reserved internal teeth | 1 inch internal tooth |
Type | requirement | condition | size | characteristic |
compressed air | Clean and dry | Above 4BAR | 8 cm air pipe and connector | |
electric energy | 380V 50/60HZ | 3-phase 5-wire system | Power: 25.8KW | Cable line 16 square meters |