Complaint
| project | Function name | Description |
| Basic Parameter | Product Model | GR02 |
| Dimension | L172mm*W188mm*H59mm | |
| Weight | 1.373KG(silver gray) | |
| Shell | Shell material: iron color: silver gray | |
| Screen | 2.0 inch LCD screen | |
| Control Mode | Panel buttons, network, mobile App | |
| CPU | ARM:GD32F205 | |
| DVR:T707 | ||
| Operation System | Linux 3.10 | |
| Storage | DDR3L:4Gb*2 | |
| EMMC:8GB | ||
| Jpg | JPG | |
| Audio and video format | Audio format:G711A Video format:H.264 | |
| resolution ratio | Storage:720P Network transmission:D1 | |
| Video Signal | CVBS,N-coding(NTSC) | |
| Video frame rate | Storage:10fps Network transmission:10fps | |
| Video bit rate | Storage:1792kbps Network transmission:512kbps/1792kbps | |
| Video mode | support | |
| Real-time video | support | |
| ACC turn off time-lapse video | support | |
| Video image | support | |
| Alarm video | support | |
| Video download | support | |
| Playback channel | support | |
| Browse Mode | support | |
| Sensor | support | |
| Network | Plus | |
| Position | GPS+Beidou | |
| WIFI | support | |
| Voltage | 9-36V | |
| Standby current | 50mA-24V | |
| Working current | 300mA-24V(non-loaded ) | |
| Backup Battery | 1200mAh 3.2V lithium iron phosphate battery | |
| Operating temperature | -25ºC- +80ºC | |
| Storage temperature | -40ºC - +85ºC | |
| Frequency Band | ||
| Qualification | conform | |
| Interface | CAN BIC | 1 way |
| 485HDMI | 1 way | |
| usbHDMI | 1 way | |
| 232UART | 2 way | |
| VIU | Maximum 6 ways | |
| ADAS interface | 1 way | |
| DSM interface | 1 way | |
| Output control circuit | 1 way | |
| High level detection circuit | 9 way | |
| Low level detection circuit | 3 way | |
| SATA | 1 | |
| SD card interface | 2 | |
| AOUT AIN | Hands-free or hand-held | |
| VGA | 1 way | |
| TTS | 1 way | |
| Function | Real-time vehicle location | support |
| video transmission | Maximum 6 ways | |
| video storage | Maximum 6 ways | |
| audio input | Maximum 5 ways | |
| audio output | Maximum 2 ways | |
| Adjustable Child main code stream | support | |
| DSM Function | support | |
| ADAS Function | support | |
| BSD Function | support | |
| fuel consumption | support | |
| load | support | |
| CAN communication | support | |
| Sharp acceleration, deceleration, and turn | support | |
| information screen | support | |
| Emergency video upload | support | |
| Remote upgrade | support |
| Functional category | Functional categories | sub function | Function description |
| On-board 3G / 4G function | Real-time audio and video | video quality | The video resolution is 720P |
| Upload channel | 3G/4G and WIFI are optional | ||
| Local video | Video quality | The video resolution is 720P | |
| Video mode | Boot video, alarm video, timing video | ||
| Automatic video coverage | Support on/off, when the storage medium is full, automatically overwrite the oldest video data Hard disk version can set backup video or cyclic video mode | ||
| Video programme Arrangement | You can set the video recording schedule from 00:00:00 to 23:59:59 from Monday to Sunday | ||
| Video encoding enabled | You can control the opening and closing of each channel | ||
| Upload video | Remote upload via wifi or 4G is optional | ||
| Power off video data protection | When the main power supply is abnormal, the device can work normally for 15S to ensure that the last data is not lost | ||
| Playback and data backup | Video export | You can export videos through WiFi or remote download (the platform provides the download function), and directly remove the SD card or hard disk to export videos | |
| replay | 1. Multi-channel synchronous playback through HD player 2. Playback is controlled through mobile phone or platform, and mobile phone communicates through WiFi terminal 3. AV screen of the device, play by mouse operation | ||
| Voice intercom | Two-way voice intercom | The platform sends an intercom request or the terminal makes an active request | |
| wireless transmission | 4G | Full netcom: Unicom, Mobile, telecom | |
| Optional built-in WIFI | Optional built-in WIFI module | ||
| Video alarm | EReport | Trigger high and low level reporting through THE IO port, such as braking, left and right turn | |
| Video Loss | Camera video loss alarm reported | ||
| Video shade | Camera occlusion reported | ||
| Voltage alarm | Power hv/LV alarm to platform | ||
| Memory failure alarm | SD card or hard disk fault, TTS playback reminder and upload platform | ||
| active safety | DSM | Fatigue, smoking, phone calls, distraction, occlusion, etc | |
| ADAS | Lane departure, vehicle close, vehicle collision and other alarms | ||
| BSD | Blind area pedestrian alarm | ||
| 794 ministry standard function | GPS data reporting | Real-time data reporting | Report vehicle position information and vehicle status regularly, in line with 808 New Beidou protocol standard |
| Accident suspect data | The suspect data can be extracted remotely by the platform or collected locally by USB | ||
| Fill the data transfer | Automatic retransmission of GPS data, the retransmission protocol supports the 808 New Beidou protocol standard | ||
| BD/GPS alarm management | Out of zone alarm | The platform delivers the regional node, and the equipment determines the location in real time, and the vehicle deviates to report the alarm to the platform | |
| Off-course alarm | The platform delivers line nodes, and the equipment judges the position in real time, and the vehicle deviates to report the alarm to the platform | ||
| Running status alarm | Rapid acceleration, rapid deceleration, sudden brake and other trigger alarm | ||
| Overspeed warning | The platform preset overspeed warning value, TTS voice alert is about to exceed speed | ||
| Overspeed alarm | The equipment preset overspeed threshold, exceed the threshold continuously for 10S, reported overspeed alarm platform | ||
| Ministry standard alarm reporting class | Equipment failure, voltage undervoltage, timeout, terminal failure and other faults reported to the platform | ||
| curfew | The platform sets the stop time, when the vehicle running alarm to the platform | ||
| drowsiness warning system | Platform warning fatigue threshold, the vehicle continuously driving 4 hours without stopping 20 minutes fatigue alarm, TTS voice reminder and report to the platform | ||
| IC card on the alarm | The driver will send alarm data to the platform when inserting and removing the IC card | ||
| Dormancy report | Sleep mode support | After the ACC is disabled, the video recording function is disabled and BD/GPS data is regularly reported | |
| Image capture | Timing captured | Set the timing capture upload platform | |
| Linkage capture | Platform command trigger, IO port trigger, serial port protocol trigger photo uploading platform | ||
| Collecting and setting parameters | parameter acquisition | The platform remotely collects device parameters, including driver identity information, driving information, vehicle information and so on | |
| parameter setting | Platform or network set terminal parameters, including audio and video parameters, BS/GPS related parameters, driving record parameters | ||
| Segmentation speed limit | voice broadcast | Supports segmented rate limiting for platforms and terminals | |
| voice broadcast | TTS broadcast | Supports external TTS voice broadcast | |
| Traffic data recording | Driving condition record | USB data export, in line with GB/T 19056-2012 standard | |
| Accident suspicious records | |||
| Overtime driving record | |||
| Driver's identity record | |||
| log record | |||
| GFP-T | External rod | Oil information | Report the tank level and calculate the remaining oil |
| Abnormal oil volume alarm | Detect abnormal decrease of oil volume and alarm to the platform | ||
| External card reader | The crew information | Report crew information to the platform | |
| External passenger flow machine | Collect passenger flow information | Report the number of passengers information to the platform | |
| Device self-checking | Power On Self Test | After the recorder installation self-check is normal, every time the ignition switch (ACC) is turned on, the positioning, communication, storage and other modules and signal input status should be self-checked first. If the startup self-test fails, the corresponding abnormal information should be displayed and the abnormal self-test status signal of the recorder should be output to the vehicle. | |
| automatic timing corrector | The calibration should be carried out in the parking state | The recorder shall have the function of automatic time correction | |
| device management | On-line Parameter Setting | On-line parameter setting, vehicle information setting | |
| Online Parameter Query | Online Parameter Query | ||
| Device Version Query | Query HIS version and ARM version | ||
| storage medium | query SD card access and current working disks | ||
| WIFI Mode | set client mode, hotspot mode, and advanced assistant mode | ||
| Password change | Factory password setting | ||
| Display Manager | Message display | Comply with GB/T 19056-2012 standard | |
| Backlit Settings | set to long or intelligent on | ||
| contrast | Contrast settable |
