Four Fluorine F4 Regeneration Tower Packing Media PTFE Pall Ring

Min.Order: 1

Product origin: Pingxiang, Jiangxi, China

Infringement complaint:

Complaint

US$ 170 ~ 220

Description

Pall ring media is the second generation random packing, it's developed on the basis of the raschig ring packing. packing pall ring media rings is to open one or two layers of rectangular holes in the sidewall, and the base material of the holes is not out of the sidewall but forms inward bending of blade.The same size of pall ring and raschig ring have the same surface area and porosity,but the PTFE pall ring's holes on its sidewall can flow gas-liquid so that the ring inner surface will be took full advantage.

-Pall ring allows the tower to operate at an optimum efficiency and throughput, consistent ratio of free and blocked passages, independent of orientation, large surface area : volume ratio augments the rate of liquid film surface renewal to improve mass transfer.

-Pall ring can widely used in adsorption, steaming and distilling performace, oil refinery, petrochemical industry, chemical industry and air pollution control etc., and also contracts anticorrosion engineering and environmental protection pall ring media can be classified at size,material. pall ring media's size could be 10mm, 16mm, 25mm, 38mm, 50mm, 76mm,90mm, 100mm etc. Materiall could be ceramic pall ring, metal pall rings materials can be carbon steel, 1Cr18Ni9Ti, stainless 304, 304L, 410, 316, 316L,904L, alloy steel materiasl.if made from plastic it's material could be pp, pvc, pvdf, rpp,cpvc and so on.

Size (mm)	Quantity (pcs/m3)	Surface Area (m2/m3)	Void Volume (%)	Dry Packing (m-1)
16x16x1.0	180000	188	91.1	275
25x25x1.0	49000	175	90	239
38x38x1.2	13600	155	89	220
50x50x1.5	6500	93	90	127
76x76x2.6	1830	73.2	92	94