Description
Pet Plastic Bottle Recycling Machine For Various Plastic Packaging RecyclingProduct Description
As we all know, the recycling of PET bottles is the most important part of plastic recycling today, and ACERETECH has also focused on the research of PET recycling for many years.
Usually we have the following steps to deal with complete PET bottles, sorting → crushing → washing → drying.
PET waste bottles are dirty and must undergo strict washing before granulation to remove oil, dust and other sundries. In addition, waste PET bottles are often accompanied by accessories such as bottle caps, labels, and bottom brackets, because they are usually made of made of PP/PE and other materials, they are incompatible with PET. Therefore, in the recycling and pelletizing process of waste PET bottles, these accessories must be sorted out separately.
Product Parameters
|
Size | Capacity | Motor Power | Equipment footprint |
AWS-PET10 | 1000kg/h | 220KW | 250m 2 |
AWS-PET20 | 2000kg/h | 260KW | 350m 2 |
AWS-PET30 | 3000kg/h | 380KW | 500m 2 |
AWS-PET40 | 4000kg/h | 500KW | 700m 2 |
|
Content | Average energy consumption per ton of bottle |
Electricity | 70-90KW |
Water | 1-1.5T |
Compressed air | 0.5-1m3 |
Steam (optional) | 250-400KG |
Detergent (optional) | 4-8KG |
|
Description | AA(ppm) | A(ppm) |
PVC content | ≤25 | ≤100 |
PE/PP/colored bottle/metal/other | ≤75 | ≤100 |
Total impurity | ≤100 | ≤200 |
Product Details
CHAIN PLATE CONVEYOR
The PET plastic bottle washing line is equipped with chain plate conveyor, which is wide and convenient for the transportation of plastic waste bottles
DE-BALER
De-baler is mainly used to break up compacted waste plastic bottles, so that they can be loosened and better entered into the next process.
BELT CONVEYOR
Conveying raw materials into next parts. Controlled by inverter, belt speed is adjustable.
Function: bottles conveying
Width of belt: 1000mm
Basic material of belt: PVC
Motor power: 2.2KW
TROMMEL
Function: remove stone, dust, loosen caps and small metal
Basis material: Galvanized carbon steel
Frame: Carbon steel
Diameter of barrel : 1500mm
Length : 5000mm
Motor power: 5.5KW
The hole diameter:50mm
FERROUS REMOVER
Function: Equipped above the conveyor belt, used to remove iron, chromium, manganese and other ferrous
Power:3KW
LABEL REMOVER
Function: remove above 90% labels for both common and compressed bottle
No flakes waste and no water consumption
Motor power: 15KW
Suction fan power: 5.5KW
Rotary blade : 42pcs ( teeth 378pcs )
Fixed blade : 45sets * 4 = 180pcs ( teeth 1080pcs )
PRE-WASHER
Function: bottle washing, remove small size impurity, decrease the working pressure for down stream. Tank body SS304
Diameter:1500mm
Length:6000mm
Motor power:7.5KW
Power of screw:2.2KW
Diameter : 250mm
SCREW LOADER
Equipped with multiple rolling screws, the material is screened by rolling, and the impurities can fall from the gap to the impurity receiving port below.
DISK SEPARATOR
Equipped with a disk separator, PET plastic bottles pass through the bouncing screen to remove loose impurities, labels, caps, etc.
BOTTLE SORTING MACHINE
The material sorting of the whole bottle can be sorted according to factors such as the color required by the customer, and the PET bottle of the same color category can be carried out to the next process.
MANUAL SORTING
The material is divided into two double stations through manual sorting for manual sorting.
CRUSHER
Divide large-size raw materials into relatively uniform small-size raw materials through crushing.
Crushing bottle to small flakes.
SCREW LOADER
Function: PET flakes conveying
Motor power: 4KW
Dia. of screw: 310mm
Part contact with raw materials: stainless steel
SEPARATION FLOATING TANK
Function: wash flakes and remove floating material as PP,PE and Caustic Soda
Motor power of screw loader: 5.5KW
Motor power of thumbwheel: 0.55KW
Quantity of thumbwheel: 3 sets
Dia. of screw:250mm
Part contact with raw materials: stainless steel<
Equipped with water tank and pump
LABEL SEPARATOR
Remove impurities such as residual PET bottle labels
HOT WASHER
Function: after hot washing, it's easier to remove oil, glue
Motor power: 5.5KW
Volume of hot chamber≈4.07 m3
Outer layer: Carbon steel
Inner layer: stainless steel
Middle layer: rock wool for insulation
Caustic soda percentage:1-2%
Temperature of hot water:70-90 centigrade
Non-stop flakes feeding and loading out
HIGH SPEED FRICTION WASHER
Function: remove the glue and dirty
Motor power: 30KW
Motor power of water pump:1.5KW
Rotary speed of screw: 1200rpm
Part contact with raw materials: stainless steel
CENTRIFUGAL DRVER
Function: Drying and flakes moisture reach 2%
Motor power: 22KW
Motor of cover open:0.75KW
Rotary speed of screw: 2200rpm
Part contact with raw materials: stainless steel
PIPELINE DRVER
Function: hot air drying, moisture < 1%
Heating power: 48KW,if adopt steam heating, this electric consumption will be saved
Power of blowing motor:5.5KW
Power of suction motor: 5.5KW
VIBRATION DRYER
Drying of washed PET bottle flakes through a vibrating sieve
CONTROL SYSTEM
With CE/TUV/ISO standard, all parameters can be set on the touch screen.
1.Electric control component: e.g. Circuit-breaker, AC contact, press button, pilot lamp.
2.For electrical controlling of the entire system.
3.Safety interlock principle.
4.All electrical units: LS, ABB.
Company Profile
FAQ
YOU ARE WELCOME TO OUR FACTORY AT ANY TIME
* ACERETECH is original manufacturer.
* If you interested in our products and we can fulfill your request , you may pay a visit to ACERETECH Factory.
* The meaning of visiting supplier, since seeing is believing, ACERETECH Machinery with own manufacture and developed& research team, we can send you engineers and make sure the high efficiency after-sales service.
SEE ACERETECH MACHINE HOW TO ENSURE THE QUALITY* In order to ensure the accuracy of each part, we are equipped with a variety of professional processing equipment and we have accumulated professional processing methods over the past years.
* Each component before assembly needs strict control by inspecting personnel.
* Each assembly is in charge by a master who has working experience for more than 15 years
* After all the equipment are completed, we will connect all the machines and run the full production line for at least 12 hours to ensure the stable running in customers' factory
THE AFTER-SALE SERVICE OF ACERETECH MACHINERY* After finishing the production, we will debug the production line, take photos, videos and send them to customers via mail or instant tools.
* After the commissioning, we will package the equipment by the standard export package for shipment.
* According to the customer's request, we can arrange our engineers to customers' factories to do the installation and training.
* Engineers, sales managers, and after-sales service managers will form an after-sales team, online and offline, to follow the customers' project.
Complaint
