Complaint
1. Type
2. State indicators
3. Channel indicators
4. Wiring Terminal and Marking
5. Internal Bus
6. Field Power
7. Buckle
8. Grounding Sheet
9. Fixed Wiring Harness
CT-623F: 8-channel digital input /24VDC/ source or sink type & 8-channel digital output /24VDC/ source type
Module features
The module supports 8-channel digital input, and supports source type and sink type two-way input. The input voltage is 0V/24VDC.
The module supports 8-channel digital output, Output high level valid, and the output voltage is 24VDC.
Module input channel can collect digital output signal of field equipment. (dry contact or active output)
The module input channel can be connected to the 2-wire or 3-wire digital sensor.
Module input channel supports 32-bit counter for each channel, the counting frequency < 200Hz.
The input channel of the module supports the signal maintenance function, and the maintenance time can be set.
The input channel of the module can set the digital signal input filtering time and the byte transfer order of the counter.
The input channel of the module can set the counting mode and counting direction independently.
Module output channel can drive field equipment .(relay, solenoid valve, etc.)
The output channel of the module is equipped with short circuit, thermal shutdown and overvoltage protection functions.
Module internal bus and field input and output , using Optocoupler isolation.
Module has 16 digital input and output channel LED indicator light.
Technical parameters
| General Parameters | |
| Power | [email protected] |
| Isolation | I/O to internal bus: opto-coupler isolation (3KVrms) |
| Field Power | Nominal voltage: 24Vdc Input range: 22~28Vdc |
| Wiring | I/O wiring: Max.1.5mm²(AWG 16) |
| Installation | 35mm DIN-Rail |
| size | 115*14*75mm |
| Weight | 65g |
| Environment Specification | |
| Working temperature | -40~85ºC |
| Environmental humidity | 5%-95% (No Condensation) |
| Protection grade | IP20 |
| Environmental Parameters | |
| Channel Number | 8-channel source/sink type input |
| Indicator | 8 channel input indicators |
| Open voltage | High input: Min.10Vdc to Max.28Vdc (Common: 0Vdc) Low input: Min.0Vdc to Max.14Vdc (Common: 24Vdc) |
| Close voltage | High input: Max.5Vdc (Common: 0Vdc) Low input: Min.19Vdc (Common: 24Vdc) |
| Open current | Max.5mA/ channel @28V |
| Input impedance | >7.5kΩ |
| Input delay | OFF to ON: Max.3ms ON to OFF: Max.2ms |
| Prop filter | Default: 10ms |
| Sampling frequency | 500Hz |
| Count frequency | <200Hz |
| Output parameter | |
| Channel Number | 8 channel source type output |
| LED Indicator | 8 channel output indicators |
| Rated current | Typical value:0.5A |
| Leakage current | Maximum value: 10uA |
| Output impedance | <200mΩ |
| Output delay | OFF to ON: Max.100us ON to OFF: Max.150us |
| Protection function | Temperature protection: typical value 135ºC Protection current: typical value 1.1A Short circuit protection support |
Modules Optional
| CT-1228 (new) | CT-1228:8 channels digital Intput/24VDC/source type, NPN, supports counting function(Max. counting frequency of 200Hz),the input voltage is 24VDC, the input low level is valid |
| CT-1218 | CT-1218:8 channels digital Intput/24VDC/sink type, PNP,supports counting function(Max. counting frequency of 200Hz),the input voltage is 24VDC, the input high level is valid |
| CT-121F | CT-121F:16 channels digital Intput/24VDC/sink type, PNP,supports counting function(Max. counting frequency of 200Hz),the input voltage is 24VDC, the input high level is valid |
| CT-222F | CT-222F: 16 channels digital Output, source, PNP, 24Vdc/0.5A,the output voltage is 24VDC, the output high level is valid |
| CT-122F | CT-122F: 16 channels digital input, source, NPN, 24VDC, supports counting function(Max. counting frequency of 200Hz),the input voltage is 0V, the input low level is valid |
| CT-221F | CT-221F:16 channels digital Output/24VDC/0.5A/sink type, NPN,the output voltage is 0V, the output low level is valid |
| CT-124H | CT-124H: 32 channels digital input, sink or source, 34Pin male connector, 24Vdc, counting function supported (counting frequency up to 200Hz) |
| CT-222H | CT-222H: 32 channels digital output, source, 24Vdc/0.5A,34Pin male connector |
| CT-2224 | CT-2224 4-channel digital output ,Source type, 5.5-40VDC ,single channel Max output. 3.3a /4 channel with Max output. 2A per channel. Channels can be used in parallel |
| CT-2228 | CT-2228:8 channels Digital Output ,source,PNP,24Vdc/0.5A, the output voltage is 24VDC, the output high level is valid |
| CT-2718 | CT-2718:8 channels Relay Output ,( 9~30Vdc@2A,[email protected], [email protected]) |
| CT-3168 | CT-3168:8 channels Analog Input,0~5Vdc,-5~5Vdc,0~10Vdc,-10~10Vdc,15 bits/16 bits,Single-end |
| CT-3238 | CT-3238:8 channels analog input/ 0& 4-20mA/15-bit,single ended |
| CT-3268 | CT-3268:8 channels analog input/-20~20mA/15-bit,single ended |
| CT-3713 | CT-3713:3 channels Analog Input,RTD(PT100) |
| CT-3723 | CT-3723:3 channels Analog Input,RTD(PT1000) |
| CT-3804 | CT-3804:4 channels Analog Input,Thermocouple( J type, K type, E type, T type, Stype, R type, B type, N type, C type) |
| CT-3808 | CT-3808:8 channels Analog Input,Thermocouple( J type, K type, E type, T type, Stype, R type, B type, N type, C type) |
| CT-4154 | CT-4154:4 channels Voltage Output,0~5Vdc,-5~5Vdc,0~10Vdc,-10~10Vdc,16 bits,Single-end |
| CT-4158 | CT-4158:8 channels Voltage Output,0~5Vdc,-5~5Vdc,0~10Vdc,-10~10Vdc,16 bits,Single-end |
| CT-4234 | CT-4234:4 channels analog output, 0& 4-20mA/16-bit,single ended |
| CT-4238 (new) not available for sale | CT-4238:8 channels analog output, 0& 4-20mA/16-bit,single ended |
| CT-5102 | CT-5102: 2 channels encoder/5V input/Quadrature decoding, direction pulse, high speed counting, 2channels DI, 2channels DO, 2 channels encoder/5V input/Quadrature decoding, direction pulse, high speed counting, 2channels DI, 2channels DO, 2 way 5V output, 32bit, Max input frequency of 1.5MHz2 way 5V output, 32bit, Max input frequency of 1.5MHz |
| CT-5112 | CT-5112: 2 channels encoder/24V input/Quadrature decoding, direction pulse, high speed counting, 2channels DI, 2channels DO, 2 way 24V output, 32bit, Max input frequency of 1.5MHz. |
| CT-5122 | CT-5122: 2-channel encoder/SSI input |
| CT-5142 | CT-5142: 2-channel encoder/differential input/quadrature decoding, direction pulse, high-speed counting, 2-channel DI, 2-channel DO, 32bit, maximum input frequency 10MHz |
| CT-5321 | CT-5321:serial port communication sub-module (RS232, RS485,RS422, either serial port is optional, it supports modbus-RTU /ASCII,master or slave mode, transparent transmission mode) |
| CT-5711 | CT-5711:Fieldbus Extended Master Module( CT-5711 need work with CT-5721) |
| CT-5721 | CT-5721:Fieldbus Extended Slave Module ( CT-5711 need work with CT-5721) |
| CT-5801 | CT-5801:Terminal module as extra module, take no module channel, ( required for each network adapter) |
| CT-623F | CT-623F:8 channels / digital input / 24VDC / source or sink type &8 channels / digital output / 24VDC / source type, single output channel max current 500mA |
| CT-7220 | CT-7220:Expansion power Supply( System power input 24Vdc,Output 5Vdc/2A,Field power input 24Vdc,Output 24Vdc/8A) take no module channel. CT-7220Power Supply Extension Module required as BOM included a 15 module rack, aslo IO Config software noticed the decreasing "Total Residual Current", |
| MTE034 | MTE034: Din Rail, 32 channels male connector,spring terminal connection ( accessories for CT-124H and CT-222H ) |
| DX210-3SFX-2000 | Length 2 meters, flame retardant material, flexible wire, both ends are female connector ( accessories for CT-124H and CT-222H ) |
1.How could i get the manual, technical detail and software?
2.Do you have after sale support?
Yes we provide all the realted technical support including remote support.
And We will provide you any necessary online training and support too.
3. How do i get a sample?
Our sales team will guide and suggest you the suitable solution.
4. Do you provide any free sample?
No, we suggested one charged sample is very necessary before any bulk order.
And we will provide all the necessary technical support included in the sample services.
5. What is the warranty?
All the ODOT products is with the warranty of 3 years.
Only ODOT-S7PPI/PPI V2.0 is with a warranty of 1 year.
6. How is the payment terms?
100% T/T in advance.
7. What is your shipping channel?
We support all the main stream courier company including: Fedex, TNT, DHL, UPS, and Aramex.
8. What is your lead time?
We will arrange the delivery in 1~ 2 day if we have finished products in stock.
If we have no stock and the lead time will be 1~2 weeks.
9. Do you provide any customized services?
We accpet deep customized services including OEM, ODM and there will be a MOQ.
10. Do you accept cooperation as distributors?
Yes partner and distributorship inquiry are warmly welcomed.
