Road Construction 3-6mm Roll Welded Wire Mesh Welding Machine Cement Precast Reinforce Mesh Welding Machine

THE MACHINE MAIN DECRIBTION:

Chain link fence machine is specially used for manufacturing chain link fences of different sizes. The wire is taken in from the pay-off and pass through the mould where the DIAMOND SIZE takes place. After passing through the mould, the diamond pattern wire is automatically thrown on the winding shaft in the switching process. Once the switching is complete,the woven is manually glided down to enable the next switch to take place.
The chain link is automatically wound to form rolls when the desired length is manufactured.
The machine is controlled by PLC automatic controller, so only one person is needed to operate it.
One side or both sides of the end of mesh hole is twisted or with burr in edge.
Finally,according to the practical need,can use the compacting machine to make the chain link fence mesh into the smaller and tight rolls.

AUTOMATIC CHAIN LINK FENCE MACHINE

• Fully automatic CNC controlled high output machine for the production of chain link fence.
• It adopts double wires feeding principle according to German technology. As so, the production capacity is greatly improved and the machine saves the material best.
• It Can automatically complete the spinning, wearing mesh, cutting wire, bending side, twisting side, rolling mesh and compacting mesh automatically. simple operation, easy to master the technology.