Description
tester Wire Cable Burning Test Device battery fire testing External Fire Exposure Test Machine Chamber Pack Solar Car Li-ion Polymer Storage Ion Lithium Battery External Fire Exposure Test Machine Standard
Relative Standard test requirements
- Test Object: Battery pack and system.
- The test ambient temperature should be above 0 ºC, wind speed is not more than 2.5 km/h, and the SOC requirement of the battery pack is more than 50%.
- In the test, the size of the Flat plate with gasoline should exceed the horizontal size of the test object by 20 cm, no more than 50 cm. The height of the Flat plate should no more than 8 cm above the gasoline. The test object should be placed in the middle. The distance between the gasoline level and the test object is set to 50 cm. Inject water to the bottom of the Flat-plate before testing. The external burning diagram is shown in the graph.
I gnite the gasoline at least 3m away from the test object, and after 60 seconds of preheating, put the gasoline plate below the test device. If the gasoline flat plate size is too large to move, you can use the way of moving the test object and rack.
Test Phase 2: Direct burning.
The test object is directly exposed to the flame for 70 seconds.
Test Phase 3: Indirect burning.
Cover the gasoline plate with refractory baffles. Keep the test object in this condition for 60 seconds. Alternatively, by mutual consent, the test object continues to be exposed directly to the flame for another 60 seconds. The refractory baffles are made of standard refractory bricks. The sieve hole size is shown in the figure below. Refractory can also be made with reference to this size.
Test Phase 4: Leave the fire source.
Remove the gasoline plate or test object. Then observe for 2h or when the test object exterior temperature drops below 45°C.
Technical Parameters
| Product Name | External Fire Exposure Test Machine |
| Model | BE-8202-2500 | BE-8202-3000 |
| Test Space | W1500 X D2500 X H800mm | W2000 X D3000 X H1000mm |
| Equipment Dimension | W7500 X D3700 X H960mm | W8500 X D4200 X H960mm |
| Movable Rack | W1500 X D3000 mm | W2200 X D3200 mm |
| Max. Load | 1000KG (2000KG,3000KG can be customized) |
| Object Holder Moving Speed | 6000mm/min (Adjustable) |
| Refractory Rack Moving Speed | 6000mm/min (Adjustable) |
| Control System | PLC touch screen close control + computer remote control |
| Ignition Mode | Automatic high pressure pack ignition |
| Distance Between Burning Plate and gasoline | The distance between the gasoline and the test object can be adjusted within the range of 450cm~550mm. The defaulted 500mm; the bottom of the gasoline plate is filled with water. |
| Refractory Brick Size | In accordance with the standard of ECER100, Refractory Brick Size 240mm*120mm*70mm. |
| Gasoline Plate Size | 3 gasoline plates-can be changed easily according to the test object size. the height of gasoline plate is no more than 80cm from the gasoline level |
| Power Supply | AC 380V,7.0KW | AC 380V,8.0KW |
| Weight | Approx 3.5 Tons | Approx 4.0 Tons |
| Other requirements | The ignition area of gasoline plate can be adjusted according to requirements. Automatic gasoline filling. Remote control. Electrical ignition according to test requirements. The video monitoring system, lighting system. |
Established in 2005, Guangdong Bell Experiment Equipment Co., Ltd is specialized in manufacturing a variety of quality inspection instruments, testing equipments and other high-tech products which mainly include: Constant Temperature & Humidity Test Chamber,High & Low Temperature Test Chamber, High & low Temperature Testers with Rapid Temperature Change, Walk-In humidity & temperature test chamber, Cool/Thermal shock test chamber, Salt spray chamber, High temperature aging tester, sand and dust testing machine,tension tester, high and low temperature testing machine , servo computer battery crush tester, mechanical vibration testerBattery washing tester ,battery burning tester and other quality testing instruments. Thanks to several decades of R&D efforts,the company has established itself as a leading provider of testing instruments of the industry, playing a crucial role in the research and development of high-quality and high-value products within the industry.
15+ years experience in test chambers manufacturing, High performance for your projects.
With unmatched quality advantage, a dynamic management team, professional customer services, superb manufacturing techniques and innovative research and development ideas, Guangdong Bell Experiment Equipment Co., Ltd, supported by an international, standard and professional quality policy, is gradually becoming an international brand. Its products are manufactured in consistent with a number of world standards.FAQ
Q1 : Can you customize the product?
A: Yes, we can customize any products according to requirements. Hot selling lab electronic
temperature humidity cabinet/Environmental climate test chamber/Car Battery Safety Test Chamber also can be customized.
Q2 : How to choose the most suitable products?
A: Our professional team will give you the best suggestion, just be patiently to tell us the information
about the parameters you require.
Q3 : Can you arrange installations and commissioning in our lab?
A: Firstly, for standard chamber we had 3-5 days commissioning before shipping,
you just need link power in your lab, then you can start to operate.
Secondly, we had detailed operation manual with chamber , any problems you can find and solve in it.
Thirdly, some customized chambers we should install and teach your team to operate .
Complaint
