Complaint
Appearance | Crystalline white particle |
Density (g/cm3) | 1.24 |
Moisture (%) | ≤0.05 |
Monomer content (%) | ≤0.3 |
Melt Flow Index (g/10min) (190C/2.16kg) | 4 |
D-Content (%) | 4 |
Melting Point (°C) | 155 |
Glass Transition Temperature (°C) | 60 |
Tensile Strength (MPa) | 45 |
Elongation at Break (%) | ≤5 |
Characteristics:
ASP84 Polylactic acid pure material - Characteristics: Low melt flow rate, Low melting point and High transparency.
ASP84 Polylactic acid pure material is suitable for Film blowing, Film laminating, and High transparent PLA products.
Typical Applications:
1. ASP84 PLA pellet is often blended with PBAT to meet the requirements of transparency, stiffness and toughness of the Film bag by adjusting the material ratio.
2. The Film laminating layer produced by ASP84 pellets is uniform and flat, with strong adhesion and gloss, which can be contacted with food, water and oil resistance, environmental protection and safety.
3. Because of high transparency of ASP84 pure material, it is suitable for making transparent packaging products through the blister process.
1. What is PLA resin?
PLA, also called Polylactic acid pellet, which is made of biological renewable resources such as corn and straw and processing through biotechnology.
2. What is the typical Characteristics of PLA resin?
Low-carbon emission, Recoverable, 100% Complete degradable, and Biocompatibility.
3. Which type of PLA resin you can supply?
We can supply the PLA pure material like (ASP21, ASP22, ASP61, ASP62, ASP64, ASP81, ASP82 and other ASP series).
We also can supply some Modified PLA material to be suitable for some special applications, like Straws, Tablewares or other products.
