Nicr/Nial Type K Thermocouple Bare Wire Nicrsi/Nisi Type N Thermocouple Extension Wire

Min.Order: 1
Product origin: Changzhou, Jiangsu, China
Infringement complaint: complaintComplaint
US$ 15 ~ 38

Description
NiCr/NiAl Type K Thermocouple Bare Wire NiCrSi/NiSi Type N Thermocouple Extension Wire

Product Description

Thermocouple Extension & Compensation Wire

There are multiple types and grades of thermocouple wire.Each type of thermocouple wire has a specific combination of metal alloys.This combination is what defines the type of thermocouple.Thermocouple grade wire is used to manufacture thermocouple probes.Thermocouple grade wire is normally used for the junction and inside the stem sheath.

Type K is the most commonly used thermocouple for measuring high temperatures, providing the widest operating temperature range from - 200 ° to + 1260 °C.Type K has a better resistance to oxidation than other types of thermocouple (except type N) and is particularly recommended for oxidizing or inert atmospheres.It should not be used without protection in sulphurous atmospheres, in reducing atmospheres or a long time in a vacuum.Must be protected from sulfurous and marginally oxidizing atmospheres. Reliable and accurate at high temperatures.
Type N thermocouple has been developed which provides much longer life, longer exposure to high temperature and better reliability of EMF drift and short term EMF changes.
Type E thermocouple has the highest EMF output per degree of all the referenced thermocouples.
Type J Thermocouple is frequently used for its low cost and high EMF It can be used in oxidizing conditions up to 760°C. For higher temperatures, it is recommended to use large wire diameters.Type J  thermocouple is  suitable for oxidizing, reducing inert atmosphere or  vacuum.
Type T thermocouple is suitable for oxidizing, reducing inert atmosphere or vacuum.

Product Parameters

Thermocouple Wire

CodeWires component of the thermocouple
+Positive leg-Negative leg
NNi-cr-si (NP)Ni-si-magnesium (NN)
KNi-Cr (KP)Ni-Al(Si) (KN)
ENi-Cr (EP)Cu-Ni<constantan> (EN)
JIron (JP)Cu-Ni<constantan> (JN)
TCopper (TP)Cu-Ni<constantan> (TN)
BPlatinum rhodium-30%Platinum rhodium-6%
RPlatinum rhodium-13%Platinum
SPlatinum rhodium-10%Platinum

Standards

ASTMANSIIECDINBSNFJISGOST
(American Society for Testing and Materials) E 230(American National Standard Institute) MC 96.1(European Standard by the International Electrotechnical Commission 584)-1/2/3(Deutsche Industrie Normen) EN 60584 -1/2(British Standards) 4937.1041, EN 60584 - 1/2(Norme Française) EN 60584 -1/2 - NFC 42323 - NFC 42324(Japanese Industrial Standards) C 1602 - C 1610(Unification of the Russian Specifications) 3044

Detailed Photos

Temperature Sensor Thermocouple Wire / Thermocouple Extension Wire 20 AWG Type K / J / T / E / B / S / R

Thermocouple Extension wire is usually used to connect thermocouple and display-controled meters in order to lower the inaccuracy caused by temperature change on the connections.
Conductor: original thermocoupole alloy material, in solid wire or strand wires
Insulation Layer:
Fiberglass              (ambient temperature range 0-300ºC
 PVC                       (ambient temperature range 0-105ºC)
 Telflon                  (ambient temperature range 0-350ºC)
 Silicone rubber   (ambient temperature range 0-180ºC)
Jacket layer materials: fiberglass, PVC, silicone rubber
Galvanized layer: stainless steel, tinned brass

Company Profile

Over the years, we have worked hard to promote and realize the modernization of alloy sales, and actively cultivated and enhanced the ability of employees' independent innovation. All-round renovation and upgrade of the original business site, facilities and equipment, and modern computer management. Hope to establish long-term partnerships and win market reputation.

We are increasing thescale of trade and customers through out the world. With our good reputation we have won the trust of our customers. It's helps the modernisation of our country and promote the economic and technical exchanges with the rest of the world. We also look forward to enhance the friendship with other countries and make positive impact.

We warmly hope that you and us together, hand in hand, create a glorious future.

DLX alloy, which is a alloy factory more than 18 years, we are founded in 2002, and run business with resistance alloy first. And in past 20 years, we R&D new product such as Thermocouple alloy,inconel, monel, hastelloy, high temperature alloy and other nickel based alloy products. 


 

Our Advantages

 

How can I contact with your company?

 

telephone.

    

What is your working time?

Monday-Friday : 8:30AM-17:00PM (Beijing time, GMT+08.00)

We have public holiday during May.1-3, Oct.1-7 and Chinese New Year holiday . Pls e-mail us during our holiday if u have any questions.

 

Do you provide free samples?

Yes, we can provide a free sample for testing,buyer should bear the shipping costs.

 

What is your payment terms?

T/T,L/C,D/A,D/P,Western Union,MoneyGram,Paypal

 

What is the lead time?

Usually sample lead time is 15 days after payment has been confirmed.

Product Tag:
Related categories:
Scroll to Top