Complaint
Main technical parameter | Volume(length×width ×height) | 370mm×340mm ×1570mm |
Weight | about 90kg | |
Power supply voltage | AC220V±10% | |
Frequency | 50HZ ~ 60 HZ | |
Power | 1500W | |
Blood pump/spare pump | Flux | 15 ~ 340ml/min (D 6mm) |
20 ~ 460 ml/min (D 8mm) | ||
Heparin pump | Flux | 0.1ml/h~10ml/h(±5%) |
Precise | 0.1ml/h | |
Injector size | 20ml/30ml/50ml 10ml/20ml/30ml (selectable) | |
Arterial pressure | Display scope | -300mmHg~+300mmHg (±10mmHg) |
Venous pressure | Display scope | -50mmHg~+300mmHg (±10mmHg) |
Dialysate flow | 300ml/min~800ml/min linearity adjustable(+10%)(-5%) | |
Temperature | 35.0ºC~39.0ºC | |
Resolving rate | 0.1ºC | |
Conductivity | 13mS/cm~15.5mS/cm(±0.1 mS/cm) | |
UF flow scope | 0~1800ml/h(±30ml/h ) 0~4000ml/h(optional) | |
ISO UF flow scope | 0~2000ml/h(±30ml/h) | |
TMP | Scope | -100mmHg ~ +600mmHg (±20mmHg) |
Blood leakage monitor | over 1ml blood per liter dialysate (flow:500ml/min) | |
Blood level monitor | ultrasonic sensor |
Infrared and response threshold value | Single air bubble of 200u I exists when Blood flux is 200ml/min |
Inflow pressure | 0MPa~0.6MPa |
Inflow temperature | 5ºC~30ºC |
Environment temperature | 10ºC~30ºC, Relative humidity≤70% |
Rinse/disinfection | chemical disinfection (citric acid,peracetic acid and oxalic acid) |
Hot rinse | 80ºC |
Back-up power supply | last for 15-30min after electric-cut. |
