Alarm Infrared Sensor Gas Meter Moniting Outdoor CO2 Carbon Dioxide Analyzer

Min.Order: 50
Product origin: Suzhou, Jiangsu, China
Infringement complaint: complaintComplaint
US$ 58.3 ~ 72.4

Description

Product Description

Product Description:
As CO2 monitor and controller with Integrated Sensor, the Wall Mount CO2 Controller AK C06, measures the CO2 level up to 5,000 ppm.
By using built-in Dual Beam NDIR technology and Day/Night auto detect sensor, its relay output could control the other connected devices, such as CO2 generator to produce in a greenhouse when the CO2 concentration is below to help increase plant yields by supplying CO2 required for photosynthesis.
It is perfect used in agricultural applications like greenhouse/ hydroponics rooms, plant factories with both audible and visual alarms.


Basic Info.

Model NO.AGc06Buzzer Sound70dB @10cm
TrademarkOEM/ODMPower SourceAC 100 ~ 240 VAC
Sensor TypeDual-Beam NDIROriginChina KunShan
CO2 Range0~5000ppmHS Code9027100090
Display TypeLCDProduction Capacity80000 Pieces/Year
Photo CellAuto detect Day/NightTransport PackageCarton
Unit Size166*75*33mmPackage Type1 pcs/Color Box
OutputPiggyback 100~240VACWeight502g ( 24.7oz) 

Feature:
≡ Dual Beam NDIR (Non-Dispersive-Infrared) technology is used to improve the long term stability.
≡  CO2 controller; Tracer
≡  Built-in Day/Night detect sensor 
≡  Chart with variable time Zoom Levels
≡  Foolproof "Hold Home" function
≡  Good Zone display indicate  

  Green backlight  

 

Parameters

LCD Display:


Trend Chart Zoom:
Below is a table that show the available Zoom Levels for all parameters CO2, as well as the duration of each division for corresponding Zoom Levels:

Multiple Mode Options

Auto Detect Day/Night
The built-in Photo-Cell sensor can automatically detect whether it is Day or Night.
In Greenhouse (Increase) mode it can override the CO2 control and shut off the CO2 generator by turning off the output power (CO2 Equipment socket) during the night. Conversely, if the Photo-Cell detects light and the CO2 level is low, the device will start the CO2 generator by turning on the output power (CO2 Equipment socket). 
In Vent (Decrease) mode, Photo-Cell status does not affect the output power (Exhaust Fan socket) ON or OFF.

Greenhouse (INCREASE) Control
This CO2 controller can be set for Green House mode application by S5 ADVANCE Mode setting, CO2 Equipment socket  is on when CO2 concentration is below Set Target Low, and off when CO2 concentration is over Set Target Hi. For example, if the Set Target Low is 1000ppm, and the Set Target Hi is 1400ppm, the output power will shut off when CO2 over 1400ppm,  and power on when CO2 below 1000ppm.

Vent (DECREASE) Mode Control
This CO2 controller can be set for Vent mode application by S5 ADVANCE Mode settingExhaust Fan socket is on when CO2 concentration is over Set Target Hi, and off when CO2 concentration is below Set Target Low


 

Specifications


Typical test conditions, unless otherwise specified:  Ambient Temp =23+/-3°C, RH=50%-70%, Altitude=0~100 meter

MeasurementSpecification
Operating Temperature32°F to 104°F (0°C to 40°C)
Storage Temperature-4°F to 140°F (-20°C to 60°C)
Designed ForIndoor use
Operating & Storage RH0-95%, non-condensing
CO2 Measurement 
Accuracy at 0~3000ppm±50ppm or ±5% of reading, whichever is greater
Accuracy over 3000ppm±7%
Repeatability20ppm at 400ppm (standard dev. of 10 readings in 1 minute)
Measurement Range0-5000ppm
Display Resolution1ppm (0-1000); 5ppm (1000-2000); 10ppm (>2000)
Temp Dependence±0.2% of reading per °C or ±2ppm per °C, whichever is greater, referenced to 25°C 
Pressure Dependence0.13% of reading per mmHg (corrected by user's altitude input)
Response Time<2min for 63% of step change or <4.6min for 90% step change
Warm-up Time<30 sec
Power Input/OutputAC 120VAC, 60Hz,  Current: 10A Max
Mains Supply VoltageFluctuations up to ±10% of the nominal voltage
Applicable PollutionDegree of the intended environment (POLLUTION DEGREE 2)
Dimension166*75*33mm
Weight502g ( 26.8oz) 
 

Working Principle & Advantages

 


 

About Us

      KUNSHAN AST Optoelectronics CO., LTD designs, develops and manufactures high quality and affordable electronic device, especially in the field of NDIR gas measurement, our team has 15 years of development experience.

        We are ISO 9001 certified ODM/OEM Company, we cooperate with many world-renowned brand companies, and our products are sold to more than 20 countries around the world, mainly the U.S.A, Europe and Japan. Our engineers design our products while keeping the following goals in mind: to ensure the highest level of quality, accuracy, our design team strives to improve the competitive edge of our products to help you develop a broader market.

      Our team is committed to the research and development of infrared measurement. Especially in the field of NDIR gas measurement, our team has 15 years of development experience, and professional engineering development experience allows us to continue to receive high praise from customers. We continue to invest and improve in research and development, automatic calibration equipment, and automatic testing equipment, so that we can better serve and meet the expectations of our global partners. Mutual benefit and win-win with partners.

 


Product Tag:
Related categories:
Scroll to Top