Complaint
Constructure & Technical Parameter:
I: Material Structure: APET/CPE
II: Raw Material Analysis
1. VMPET Occupied: 76% 0.012mm
2. PE Occupied: 23% 0.0627mm
3. Adhesives Occupied: 1% 0.0003mm
III: Technical Parameter
| Product Structure | APET+PE | Products Standard | GB/T21302-2007 |
| Temperature of Testing Room | 22 ºC | Relative Humidity | 52% RH |
| Test Item | Standards | Test Results | Decision |
| Appearance | No wrinkle, wire drawing, water lines, bladeline, printing ink, bubble, tunnel, burr and other bad performance | Yes | Qualified |
| Smell | No Smell | Yes | Qualified |
| Text and Design Deviation | Similar to the prototype, text clear, deviation plus or minus 1.5 mm | Yes | Qualified |
| Sealing Side Width | 5 ± 2 mm | 5 | Qualified |
| Thickness | 0.075± 0.005 mm | 0.074 | Qualified |
| Puncture Strength | ≥ 3N | 4.5 | Qualified |
| Stripping Resistance | Outer layer ≥/ | / | Qualified |
| Inner layer ≥1.5 | 2.1 | Qualified | |
| Hot Sealing Strength | ≥25N/15mm | 41 | Qualified |
| Tensile Strength | ≥35N/15mm | 46.5 | Qualified |
| Ratio of Break Elongation | ≥25% | 51.50% | Qualified |
| Anti-pendulum Impact Energy | ≥0.6J | 0.8 | Qualified |
| Friction Coefficient | ≤0.4 | 0.25 | Qualified |
| Empty Bag Edge | ≤50NJ (Test standard ANSI/ESD STM11.31) | 3.5 | Qualified |
| Surface Resistance | 10*E6~10*E10 Ω | 10*E10 | Qualified |
| Oxygen Transmissibility | ≤150cm3/m2.24h.atm | 38 | Qualified |
Production and Packing
Packing: carton and pallet
The cartons size depends on bag size, normally 20-25 kg per carton.
LEENOL is "ESD Total Solution" company for factories and labs with
ESD/Anti-Static requirement. Main Products include:
•Lab Equipements: ESD Workbench, ESD Floor, ESD Chairs
•Personal Protection Equipements: ESD Lab Coat, ESD Glove, ESD Shoes, Wrist/Heel Strap
•ESD packaging items: ESD Shielding Bags, ESD corrugated sheet/box
•ESD equipments for production line: ESD Magzine Racks, ESD Tray/Box, ESD Trolley.
•ESD Tools and tester: ESD Brush, ESD Tweezers, Ionizing Air Blower.etc
Our Office:
Our Team:
Q1: Are you a manufacturer?
Ans:Yes, We have rich experience in ESD packing bags.
Q2: How long you could prepare samples?
Ans:Normally 3days; If customized size and design, about a week around.
Q3: How about batch order production?
Ans: normally 3-15 days.
Q4:Do you inspect the finished products?
Ans:Yes, We will do inspection according to ISO 9000 standard and ruled by our QC staff.
Q5: How do you ship the goods?
Ans: by sea, by air, by courier etc.
