Complaint
About CNC Automatic High-Speed Circular Saw Machine:
1. Man-Machine Interface System
The easy-to-operate intelligent automated servo system with user-friendly touch screen and PLC control system ensures the efficiency and reliability of program operation.
2. One-Piece Machine Foundation
The machine foundation uses high strength casting ensures stable machine performance, high cutting efficiency,and precision. Foundation is equipped with a circulating water cooling tank, which can satisfy the needs of using water-based coolant fluid when cutting tough alloy steel materials.
3. New Gearbox Structure
The innovative designed gearbox structure and configuration apply to a wide range of cutting materials.
4. Remnant Management Device (Third vise)
The unique short remnant clamping structure(P series)changed from a single cylinder to double cylinder separate actions with a vertical clamping device, increase the devise stability and reliability, blade lifetime, yield rate, and saves costs.
5. Innovative Automatic Feeding Device
The material feed utilizes a servo-controlled motor with ball screw and linear guiding. Specially designed structure of feed clamp yaw effectively increases the precision and reliability.
6. Spray-Mist Lubricant Cooling System
The advanced MQL circular saw blade spray-mist lubricant technology can increase blade service life.
Standard | Optional | |||
| 1 | One set of two-axis electrical system | 1 | Oil mist collector | |
| 2 | Hydraulic system | 2 | Extended feed loader | |
| 3 | Automatic spray-mist lubrication system | 3 | Power-driven wire brush | |
| 4 | Automatic material feed loader | 4 | Cooling water pump | |
| 5 | Spiral type chip conveyor | 5 | Automatic chain type chip conveyor | |
| 6 | Wire brush | 6 | Third Vise | |
| 7 | One air spray gun | 7 | Extended carrying device for cut-off workpiece | |
| 8 | Circular saw blade | |||
| 9 | One set of tool kits | |||
| P SERIES CNC HIGH-SPEED CIRCULAR SAW MACHINE TECHNICAL DATA | |||
| Specifications | HD-120P 2-Axis | HD-120P 3-Axis | |
| CUTTING CAPACITY | Round bar (mm) | 30-120 | 30-120 |
| Square bar (mm) | 30-100 | 30-100 | |
| Trimming length (mm) | 10-100 | 10-100 | |
| Single feed length (mm) | 8-800 | 8-800 | |
| Remnant length (mm) | 70 | 30 | |
| Perpendicularity tolerance (mm) | ±0.05/100 | ±0.05/100 | |
| Feed axis | AC servo + ball screw | ||
| Cutting axis | AC servo + ball screw | ||
| SAW BLADE | Dimensions (mm) | Φ400 x Φ50 x T2.6/t2.25 | |
| Pin hole (mm) | Φ80/4/ Φ16 | ||
| Number of teeth (Z) | 54,60,72,80,100,120 | ||
| PARAMETERS | Blade feed rate (mm/min) | 0-3000 | 0-3000 |
| Rapid advance movement (m/min) | 18 | 18 | |
| Feed rate (m/min) | 20 | 20 | |
| Blade speed (RPM) | 50-130 | 50-130 | |
| Main drive motor (KW) | 15/4p | 15/4p | |
| Blade feed servo motor (KW) | 3 | 3 | |
| Feed servo motor (KW) | 2 | 2 | |
| Third vise servo motor (KW) | - | 1 | |
| Hydraulic pump motor (KW) | 2.2 | 2.2 | |
| Hydraulic pressure (MPA) | 7 | 7 | |
| Tank capacity (L) | 90 | 90 | |
| Main vise | Horizontal + Vertical clamping | ||
| Feed vise | Horizontal clamping | ||
| Working voltage (V) | 380 | 380 | |
| Total power (KW) | 24 | 25 | |
| Machine weight (Loader included) (KG) | 5500 | ||
| Machine dimensions estimated (mm) | L 2700 * W 2050 * H 1850 | ||
| Machine dimensions estimated (loader included) (mm) | L 7380 * W 2050 * H 1850 | ||
| LOADER | Number of pieces (P) | Φ120 x 6m x 8 | |
| Length (m) | 3-6m | 3-6m | |
| * Please note: all product technical information, parameters, specifications, dimensions, and designs shown in this catalog are subject to change without prior notice. For more information, please contact Hengerda. | |||
