Complaint
Road studs play an essential role in the reinforcement of road line demarcation and are vital with assisting motorists to remain on the correct side of the road and not swaying into oncoming traffic. When a motorist goes over a road line with road studs there will be a change in motion as well as a warning sound (the motorist will feel as if they are going over small bumps and the noise will be similar to a 'thunk' when the wheel makes contact with the road stud).
Features
* solar powered
* Aluminum body shell OEM &ODM service available
* IP68 waterproof, can work in the water
* Recharging at day and working automatically at night
| Solar panel | 0.4w |
| Light source | 4 LED |
| Light color | Blue (customized) |
| Material | Aluminum alloy+PC |
| Battery | NI-MH 750mAh |
| Size | 140x140x50mm |
| Working temperature | -30~+65ºC |
| Flash mode | steady/flash |
| Working hours | Over 8 hours by shined for 8 hours with standard luminous intensity |
Attentions for road stud installation
Before installing road studs on the road, please place safety isolation facilities. This is a very important point. During the entire installation process, whether it is a new road or a road that has been opened to traffic, everyone should carry out all installation activities in safety facilities.
Determine the installation position of the road studs and ensure that the installation position is level. For roads with swelling, cracks, and unevenness, the roads should be leveled and smoothed in advance.
Clean the installation location with a brush and ensure it is dry.
Take an appropriate amount of glue and apply it evenly on the studs.
Press the cat eye road stud firmly on the installation position to ensure the direction is correct. If there is too much glue, please clean it.
If it is a cat's eyes solar road stud with spike, please make sure that the depth of the hole is 1cm larger than the depth of the spike, and the diameter of the hole is 2mm larger than the diameter of the spike.
If it is an inground solar road stud, you must pay attention to the grounding hole and its size must be appropriate to prevent the bolt from shaking.
Carry out a tour within two hours after installing the led road markers to ensure that all spikes will not be reversed, bent or bent.
Please remove the safety isolation facilities after the solar pavement markers are cured for 6 hours.
The installation of road studs is not a complicated matter, but there are many details that need attention. These details play a very important role in ensuring the quality requirements and service life of road studs.
Solar road studs are improved and innovated on the basis of traditional cat-eye reflective road signs, mainly to develop the field of road traffic safety, with the purpose of improving road safety and reducing the probability of traffic accidents. At the same time, it can also be used in other fields, such as courtyard decorative lighting, square landscape lighting, etc.
Q1. Are you a factory?
A: Yes, We are 20 years experienced manufacturer of series traffic safety products, have wide range of production line, included warning light, led beacon, solar road stud, traffic sign and other products that related to traffic safety.
Q2. Can I get some samples of solar road stud?
A: We are fully supporting sample or trial orders!
Q3. What's the delivery time?
A: Usually take 10-20 days for order at ordinary time, please kindly check for correct led time when ordering.
Q4. Can I mix different models in one order?
A: Of course, any color any model is required.
Q5. How does your factory do regarding quality control?
A: Quality is a priority. Our QC Team will control from the very beginning to the end of the production. Every product will be fully assembled and carefully tested before it's packed for shipment.
Q6. How do you ship the goods?
A: Sea shipment, Air cargo, International Express.
Q7: What's the payment you accept?
A: T/T, L/C, PayPal.
For more product details, specifications and certification, please contact us
