Optical Transceiver with Full Real-Time Digital Diagnostic Monitoring/Optical Transceiver Module

Min.Order: 10

Product origin: Shanghai, China

Infringement complaint:

Complaint

US$ 85

Description

General Introduction:
This product is a transceiver module designed for 2m-10km optical communication
applications. The design is compliant to 40GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4
CWDM channels signals, and converts them to 4 channel output electrical data.

The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as
members of the CWDM wavelength grid defined in ITU-T G.694.2. It contains a duplex LC connector for the optical interface and a 38-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module.

The product is designed with form factor, optical/electrical connection and digital
diagnostic interface according to the QSFP+ Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.

Products Name:
QSFP+ LR4 10km optical transceiver with full real-time digital diagnostic monitoring and pull tab

Product Features:
1).Compliant with 40G EthernetI EEE802.3ba and 40GBASE-LR4 Standard
2).QSFP+ MSA compliant
3).Compliant with QDR/DDR Infiniband data rates
4).Up to 11.2Gb/s data rate per wavelength
5).4 CWDM lanes MUX/DEMUX design
6).Up to 10km transmission on single mode fiber (SMF)
7).Operating case temperature: 0 to 70ºC
8).Maximum power consumption 2.5W
9).LC duplex connector
10).RoHS compliant

Applications:
1).40GBASE-LR4 Ethernet Links
2).InfinibandQDRandDDR interconnects
3).Client-side 40G Telecom connections

Electrical Characteristics:
The following electrical characteristics are defined over the Recommended
OperatingEnvironment unless otherwise specified.

Parameter	Test Point	Min	Typical	Max	Unit	Notes
Power Consumption				2.5	W
Supply Current	I_CC			0.7	A
Transceiver Power-on Initialization Time				2000	ms	1
Transmitter (each Lane)
Single-ended Input Voltage Tolerance (Note 2)		-0.3		4.0	V	Referred to TP1 signal common
AC Common Mode Input Voltage Tolerance		15			mV	RMS
Differential Input Voltage Swing Threshold		50			mVpp	LOSA Threshold
Differential Input Voltage Swing	Vin,pp	190		700	mVpp
Differential Input Impedance	Zin	90	100	110	ohm
Differential Input Return Loss		See IEEE 802.3ba 86A.4.11			dB	10MHz- 11.1GHz
J2 Jitter Tolerance	Jt2	0.17			UI
J9 Jitter Tolerance	Jt9	0.29			UI
Data Dependent Pulse Width Shrinkage (DDPWS ) Tolerance		0.07			UI
Eye Mask Coordinates {X1, X2, Y1, Y2}		0.11, 0.31 95, 350			UI mV	Hit Ratio = 5x10^-5
Receiver (each Lane)
Single-ended Output Voltage		-0.3		4.0	V	Referred to signal common
AC Common Mode Output Voltage				7.5	mV	RMS
Differential Output Voltage Swing	Vout,pp	300		850	mVpp
Differential Output Impedance	Zout	90	100	110	ohm
Termination Mismatch at 1MHz				5	%
Differential Output Return Loss		See IEEE 802.3ba 86A.4.2.1			dB	10MHz- 11.1GHz
Common Mode Output Return Loss		See IEEE 802.3ba 86A.4.2.2			dB	10MHz- 11.1GHz
Output Transition Time		28			Ps	20% to 80%
J2 Jitter Output	Jo2			0.42	UI
J9 Jitter Output	Jo9			0.65	UI
Eye Mask Coordinates {X1, X2, Y1, Y2}		0.29, 0.5, 150, 425			UI mV	Hit Ratio = 5x10-5

Optical Characteristics:

Parameter	Symbol	Min	Typical		Max	Unit	Notes
Wavelength Assignment	L0	1264.5	1271		1277.5	nm
	L1	1284.5	1291		1297.5	nm
	L2	1304.5	1311		1317.5	nm
	L3	1324.5	1331		1337.5	nm
Transmitter
Side Mode Suppression Ratio	SMSR	30				dB
Total Average Launch Power	P_T				8.3	dBm
Average Launch Power, each Lane	P_AVG	-4			2.3	dBm
Optical Modulation Amplitude (OMA), each Lane	P_OMA	-4			3.5	dBm	1
Difference in Launch Power between any Two Lanes (OMA)	Ptx,diff				6.5	dB
Launch Power in OMA minus Transmitter and Dispersion Penalty (TDP), each Lane		-4.8				dBm
TDP, each Lane	TDP				2.6	dB
Extinction Ratio	ER	3.5				dB
Relative Intensity Noise	RIN				-128	dB/Hz	12dB reflection
OpticalReturnLossTolerance	TOL				20	dB
TransmitterReflectance	R_T				-12	dB
Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3}		{0.25, 0.4, 0.45, 0.25, 0.28, 0.4}
Average Launch Power OFF Transmitter, each Lane	Poff			-30		dBm
Receiver
Damage Threshold, each Lane	TH_d	3.3				dBm	2
Total Average Receive Power					8.3	dBm
Average Receive Power, each Lane		-13.7			2.3	dBm
Receiver Reflectance	R_R				-26	dB
Receiver Sensitivity (OMA), each Lane	SEN				-11.5	dBm
Stressed Receiver Sensitivity (OMA), each Lane					-9.6	dBm	3
Difference in Receive Power between any Two Lanes (OMA)	Prx,diff				7.5	dB
LOS Assert	LOSA	-28				dBm
LOS Deassert	LOSD				-15	dBm
LOS Hysteresis	LOSH	0.5				dB
Receiver Electrical 3 dB upper Cutoff Frequency, each Lane	F_C				12.3	GHz
Conditions of Stress Receiver Sensitivity Test (Note 5)
Vertical Eye Closure Penalty, each Lane			1.9			dB
Stressed Eye J2 Jitter, each Lane			0.3			UI
Stressed Eye J9 Jitter, each Lane			0.47			UI

Digital Diagnostic Functions:
The following digital diagnostic characteristics are defined over the normal operating conditions unless otherwise specified.

Parameter	Symbol	Min	Max	Unit	Notes
Temperature monitor absolute error	DMI_Temp	-3	+3	ºC	Over operating temperature range
Supply voltage monitor absolute error	DMI_VCC	-0.1	+0.1	V	Over full operating range
Channel RX power monitor absolute error	DMI_RX_Ch	-2	+2	dB	1
Channel Bias current monitor	DMI_Ibias_Ch	-10%	+10%	mA
Channel TX power monitor absolute error	DMI_TX_Ch	-2	+2	dB	1

Main Export Countries & Areas:
Usa, Uk, Japan, Germany, Spain, France, Swiss, Korea, Russia, Mexico, Brazil, Argentina,Pakistan, India, Portugal, Canada, New Zealand, Australia, Saudi Arab, Turkey, Finland, Poland ,etc.

Payment Method: by T/T or Western Union.
Delivery time: 7-10 days.
Quality Warranty: Ruitaiphotoelectric(Raytekoptics) offers quality warranty for our optical transceiver products with "3R" policy. For any inferior-quality products, Ruitaiphotoelectric(Raytekoptics) is responsible for return, replacement and refund.

Forward

Related products