Shell Pressure Resistant Gear Oil S4 Gx Gxv We 150 220 320 460 Full Heat Resistant S4 Gx 68 (20L)

Min.Order: 1,000
Product origin: Handan, Hebei, China
Infringement complaint: complaintComplaint
US$ 1.5 ~ 2.5

Description


 

Product Description

 

Gear oil basic performance
1 Appropriate viscosity and good viscosivity, viscosity is the most basic performance of gear oil. The viscosity is large, the lubricating oil film formed is thick, and the load resistance is relatively large
Adequate extreme pressure wear resistance
3. Good emulsification resistance
4 Good oxidation stability and thermal stability
5 Good foam resistance
6 Good rust and corrosion resistance

Product Parameters

Vehicle gear oil common code/model: GL-5 80w/90 GL-5 85w/90
Industrial gear oil common code: CKC (medium load) CKD (heavy load)
Industrial gear oil commonly used model: 150# 220# 320# 460# 680#



Main Indicators

L-CKC medium load closed industrial gear oil

Project
Unit
Index Quality
Method Test
68#
100#
150#
220#
320#
460#
680#
Viscosity of motion(40ºC)
mm2/s
61.2~
74.8
90~
110
135~
165
198~
242
288~
352
414~
506
612~
748
GB/T265
Viscosity index, not less than 
90
GB/T2541
Flash point (opening), not lower than
ºC
180
180
200
200
200
200
200
GB/T267
Pour point, not above
ºC
-8
-8
-8
-8
-8
-8
-5
GB/T3535
Water, not more than
%
Trace
GB/T260
Mechanical impurities, not greater than
%
0.02
GB/T511
Copper corrosion (121ºC, 3h), not greater than
 
1
GB/T5096
Liquid phase corrosion test (distilled water, synthetic seawater)
 
No rust
GB/T11143

Bubble property (bubble tendency/bubble stability)

24 degrees Celsius, no more than

93.5ºC, no more than

After 24ºC, not more than

mL/mL
75/10
75/10
75/10
GB/T12579

Resistance to emulsification (82ºC)

Water in oil, not more than

Emulsion layer, not greater than

Total separated water, not less than

%
mL
mL
1.0
2.0
60
1.0
2.0
60
1.0
2.0
60
1.0
2.0
60
1.0
2.0
60
1.0
4.0
50
1.0
4.0
50
GB/T8022

Timken machine test

OK load, not less than

N(lb)
200(45)
GB/T11144

FZG Gear test (A/8.3/90)

Pass grade, not less than

 
11
S


GL-4 medium load vehicle gear oil
Project
Unit
Index Quality
Method Test
90
85W/90
80W/90
Kinematic viscosity (100 ºC )
mm2/s
13.5~24.0
GB/T265
Viscosity index, no less than
 
75
-
-
GB/T2541
When the apparent viscosity reaches 150Pa·s,
the temperature is not higher than
ºC
-
-12
-26
GB/T11145
Flash point (opening), not below
ºC
180
180
165
GB/T3536
Pour point, not above
ºC
-10
-15
-30
GB/T3535
Mechanical impurities, no more than
%
0.05
GB/T511
Water, no more than
%
 
GB/T260
Copper corrosion (121ºC, 3h), not greater than
 
3b
GB/T5096
Corrosion test (15# steel bar) 
 
GB/T11143A
Maximum no card bite load PB, not less than
N
883
GB/T3142
Foam characteristics (foam tendency/foam stability)
24ºC±0.5ºC, not more than
93ºC±0.5ºC, not more than
After 24ºC±0.5ºC, not more than
mL/mL
100/0
100/0
100/0
GB/T12579


Industrial Gear Oil
 
ClassificationCurrent nameComposition, characteristics and instructions for use
L-CKB
Anti-oxidation and anti-rust type
General industrial gear oilIt is prepared by adding anti-oxidation and anti-rust additives to refined mineral oil. It has strict anti-oxidation, anti-rust, anti-foam and anti-emulsification performance requirements. It is suitable for general light load gear lubrication
L-CKC
Extreme pressure type
Medium load industrial gear oilIt is prepared by adding anti-oxidation, anti-rust and extreme pressure anti-wear agent with refined mineral oil. It has better anti-wear property than CKB and is suitable for gear lubrication with moderate load
L-CKD
Extreme pressure type
Heavy duty industrial gear oilIt is prepared by adding anti-oxidation, anti-rust and extreme pressure anti-wear agent with refined mineral oil. It has better anti-wear and thermal oxidation stability than CKC, and is suitable for heavy load gear lubrication under high temperature
L-CKE
Worm gear and worm
Worm gear and worm oilIt is made of refined mineral oil or synthetic hydrocarbon and oil agent. It has good lubrication characteristics and anti-oxidation and anti-rust properties. It is suitable for worm gear lubrication
L-CKT
Synthetic hydrocarbon extreme pressure type

Low temperature medium load

Industrial gear oil

Using synthetic hydrocarbon as base oil and adding additives similar to CKC, it has better low temperature and high temperature performance besides the characteristics of CKC, and is suitable for lubrication of medium load gear in high and low temperature environment
L-CKSSynthetic hydrocarbon gear oilWith synthetic oil or semi-synthetic oil as the base oil to add a variety of corresponding additives, suitable for low temperature, high temperature or temperature change, fire resistance, heat resistance, chemical resistance and other special occasions of gear transmission lubrication

Gear oil for vehicles
 
Service performance classificationGL-1GL-2GL-3GL-4GL-5
Old API usage
Classification of performance
OrdinaryWorm gearMedium extreme pressureUniversal high extreme pressure 
Type of lubricating oilStraight run or residual run oilContaining oil agent, grease, straight run or residual run oilA mixture of straight-run or residual oils containing compounds such as sulfur, phosphorus, or extreme pressure agents such as zinc compounds  
Scope of applicationLow load and low speed helical gear, worm gear, bevel gear and manual transmissionWorm gear and other gears with higher speed, higher load and more demanding conditions (hypoid gears cannot be used)Spur gear and manual transmission with medium load and speed of GL-1 or GL-2 cannot be used (hypoid gears are not suitable)Hypoid gears with high speed and low torque, low speed and high torque, and other gears working under very harsh conditionsHypoid gears with higher resistance to low speed and high torque, high speed and low torque and high speed and impact load than GL-4
Position of useCan not meet the requirements of automobile gear, can not be used in automobilesCan not meet the requirements of the automobile gear, except special circumstances can not be used in the automobileTransmission, steering gear and differential gear for ease of conditionDifferential gear, transmission gear and steering gearDifferential gears and rear axle gears with particularly demanding working conditions
Extreme pressure dose, %  2-43-66-10
Pretty standard  MIL-L-2105MIL-L-2105B(C) 



 

Packaging & Shipping


 

Company Profile

Hebei Fangke New Material Technology Co., Ltd. is an industrial enterprise committed to the production and supply of lubricating oil, grease, carburizer, graphite block, graphite electrode, anthracite and other materials.
The company is engaged in the field of technical production and research and development, strong technology. The company's product production equipment and testing instruments, has an excellent marketing team and domestic regional channel partners, for the product market development and product after-sales service has a sound management plan.
Strong, professional production chain and advanced, perfect sales service, so that our company's products at home and abroad have enough confidence to every customer choose our company to bring a good reputation and customer experience.
With will as always uphold the "reputation first, customer first" principle, always put the interests of customers in the first place. We are dedicated to provide the best products and the best quality service for each of our customers.
New century, new challenges and opportunities. The global product market is expecting us to make great plans, we will run to create the enterprise Hongda brand goal, adhere to the steady operation and long-term development, at the same time, with strong resources, strictly forbidden production management and business philosophy, through the accumulation of experience and unremitting improvement to the future, to provide you with quality, competitive price products.
Welcome friends to visit the guidance and business negotiations.

 

FAQ

Q1. Are you a trading company or manufacturer?

A1. We are a professional grease company with 15 years of industry experience.

 

Q2. What is the L/T?

A2. The lead time will be roughly 10 days after deposit payment if you place an order of one container once.

 

Q3. What is your terms of payment?

A3. Based on our sales policy, T/T 30% as deposit should be paid before order, and 70% balance payment should be completed before shipment. We can provide you with real photos or video of the goods before balance payment.

 

Q4. What is your terms of delivery?

A4. It will be available in EXW, FOB, CFR or CIF.

 

Q5. What is the packaging for the grease?

A5. Generally, packed with barrel, PE bag, can, spring tube or drum in different size, that depends on your final requirement.

Scope Application

Automotive gear oil and industrial gear oil
The former is used to lubricate all kinds of automobile manual transmission and gear shaft; The latter is used to lubricate gears in various industries such as metallurgy, coal, cement and chemical industry.








 








 

 

Product Tag:
Related categories:
Scroll to Top