Description
Injection Manufacture Lumps Plastic Recycling Machine PartsProduct Description
LS series single shaft light shredder has been specially designed for waste plastic products with small volume and wall thickness. This series of shredders have a tangential in-feed to eliminate the need for a hydraulic feeding system. Outboard bearings and E-type smooth rotors with rotor widths of 600mm and 800mm, driven by a reducer. The rotor knife is fixed on the rotor by a moving knife holder. The rotor knife adopts a square knife with a groove in the middle. The 4 corners of the rotor knife can be used alternately, and each knife can be used 4 times continuously. The ultra-low speed of 60rpm combined with the compact design of the shredder itself makes it even quieter when shredding blocks. The plug-and-play intelligent control system guarantees that the equipment is ready at any time and place. Compared with other large shredders, LS series has a small footprint, flexible movement, and more convenient and fast maintenance.
Application:
LS series shredder has been designed for small and medium sized parts,such as:
Pipes with small volume and wall thickness.
Waste hollow, sheet, profile from plastic production manufacture.
Lumps and purges from injection manufacture.
Product Parameters
Model | LS 600 | LS 800 |
Machine weight in kg approx | 1150 | 1500 |
Machine measure in mm approx | 1894*1384*580 | 1800*1500*1500 |
Capacity in kg/h approx. | 300-500 | 500-800 |
Feed opening (mm) | 580*1200 | 780*1200 |
Standard motor (KW) | 18.5 (WEG brand) | 22 (WEG brand) |
Number of rotor knives | 26 | 34 |
Number of stator knives | 4 | 6 |
Rotor diameter (mm) | 250 | 250 |
Rotor speed | 61 | 61 |
Screen size(mm) | 40-100 | 40-100 |
Bolt in Rotor knife holders | included | included |
Hopper for manual /conveyor feeding | included | included |
Two-speed hydraulic feeding ram | included | included |
Ramb plate | included | included |
Product Details
Belt Conveyor
* The plastic waste is conveyed into the shredder through the belt feeding device;
* The device adopts ABB frequency converter for frequency control.
* The conveying speed of the belt feeding device is linked with the fullness of the shredder, and the speed of the conveyor belt is automatically adjusted according to the current of the shredder.
Metal Detector
Optional Ferrous Metal Permanent Magnetic Belt or metal detector can prevent metal specials from entering the shredder and effectively protect the blades of the shredder.
Hopper
Special designed hopper to avoid material flying out. The machine is fitted with a large filling hopper and can be loaded by conveyor belt, fork lift, crane or wheel-loader. This funnel can be adapted to suit individual requirements and guarantees a continuous and economical supply of material.
Hydraulic Ram
The hydraulically operated pusher feeds the material towards the cutter automatically by load-related controls. The hydraulic system is equipped with overflow valves and volumetric flow controls, which can be both set according to the demands of the input materials.
Rotor
The rotor is made of seamless steel pips with the diameter of 20mm and operates at a speed of 61 rpm. The concave ground, aggressive and 4-way rotating knives are mounted in the grooves of the rotor. This enables a reduction of the cutting gap between the counter knives and the rotor and guarantees a high flow rate, low power consumption and maximum output of ground material.
Knife Blades
Knife Blades Material: DC53
Higher hardness (62-64 HRc) than D2/SKD11 after heat treatment
Twice the toughness of D2/SKD11 with superior wear resistance
Substantially higher fatigue strength compared to D2/SKD11.
Screen
The screen mounted beneath the rotor determines the size of the required flakes. The screen is also easily accessible by a separate flap and can be changed easily. The screen can be opened or closed hydraulically.
Shredder Chamber
The shredder chamber is welded with 30mm ultra-high hardness steel plate, which is wear-resistant, corrosion-resistant, low-noise, and has a longer service life.
Motor
Adopt imported brand motor WEG, low energy consumption, low noise, long service life.
Electronic Control
The whole model adopts frequency conversion control and conforms to international standards such as CE.
Company Profile
FAQ
YOU ARE WELCOME TO OUR FACTORY AT ANY TIME
* ACERETECH is original manufacturer.
* If you interested in our products and we can fulfill your request , you may pay a visit to ACERETECH Factory.
* The meaning of visiting supplier, since seeing is believing, ACERETECH Machinery with own manufacture and developed& research team, we can send you engineers and make sure the high efficiency after-sales service.
SEE ACERETECH MACHINE HOW TO ENSURE THE QUALITY
* In order to ensure the accuracy of each part, we are equipped with a variety of professional processing equipment and we have accumulated professional processing methods over the past years.
* Each component before assembly needs strict control by inspecting personnel.
* Each assembly is in charge by a master who has working experience for more than 15 years
* After all the equipment are completed, we will connect all the machines and run the full production line for at least 12 hours to ensure the stable running in customers' factory
THE AFTER-SALE SERVICE OF ACERETECH MACHINERY
* After finishing the production, we will debug the production line, take photos, videos and send them to customers via mail or instant tools.
* After the commissioning, we will package the equipment by the standard export package for shipment.
* According to the customer's request, we can arrange our engineers to customers' factories to do the installation and training.
* Engineers, sales managers, and after-sales service managers will form an after-sales team, online and offline, to follow the customers' project.