Complaint
| Subject | Symbol | Description |
| Sealing & Sealing type | Z | Metal shield on one side. |
| ZZ | Metal shields on both sides. | |
| RS | Rubber seal on one side. | |
| 2RS | Rubber seals on both sides. | |
| ZNR | Shield on one side, snap ring groove in the outer ring, with snap ring on the opposite side of the shield | |
| 2ZNR | Shield on both sides, snap ring groove in the outer ring, with snap ring | |
| ZNBR | Shield on one side, snap ring groove in the outer ring, with snap ring on the same side as the shield | |
| Cage Materials | J | Pressed steel cages |
| M | Solid brass cage | |
| F | Solid cage made from steel or iron | |
| Y | Pressed brass cages. | |
| T | Laminated phenolic cages. | |
| TN | Polyamide cages | |
| TH | Glass-fiber reinforced phenolic resin cages. | |
| TV | Polyamide cage | |
| Cage Designs | P | Window-type cage |
| H | Claw-type cage | |
| A | Cage guided on the bearing outer ring | |
| B | Cage-guided on the bearing inner ring | |
| S | Cage with lubricating slots in the guiding surfaces | |
| D | Carbonitriding cage | |
| W | Welded cage | |
| R | Riveted Cage | |
| Cage Types | N/A | Claw-type cage |
| Ribbon cage | ||
| Crown cage | ||
| Sunflower cage | ||
| Tapered cage | ||
| Tolerances | PN(P0) | Bearings in standard tolerance |
| P6 | Tighter tolerance than standard bearings | |
| P5 | Tolerance tighter than P6 | |
| P4 | Tolerance tighter than P5 | |
| P2 | Tolerance tighter than P4 | |
| Contact Angle | C | Contact angle 15˚. |
| AC | Contact angle 25˚. | |
| CA | Contact angle 20˚. | |
| E | Contact angle 35˚. | |
| B | Contact angle 40˚. | |
| Bearing Sets | DB | Two bearings: back-to-back. |
| DF | Two bearings: face-to-face. | |
| DT | Two bearings: in tandem. | |
| TBT | Three bearings: tandem and back-to-back. | |
| TFT | Three bearings: tandem and face-to-face. | |
| QFC | Four bearings: tandem and face-to-face. | |
| DB | Two bearings: back-to-back. | |
| DF | Two bearings: face-to-face. |
| Designation | Boundary Dimension (mm) | Limiting Speed (rpm) | Load Rating (Kn) | Weight | ||||
| Designation | Inner Diameter (d) | Outside Diameter (D) | Width (B) | Grease Lubrication | Oil Lubrication | Dynamic Load (cr) | Static Load (cor) | Weight (kg) |
| 7000C | 10 | 26 | 8 | 19000 | 28000 | 4.92 | 2.21 | 0.025 |
| 7000AC | 10 | 26 | 8 | 19000 | 28000 | 4.75 | 2.14 | 0.025 |
| 7001C | 12 | 28 | 8 | 18000 | 26000 | 5.41 | 2.6 | 0.027 |
| 7001AC | 12 | 28 | 8 | 18000 | 26000 | 5.21 | 2.53 | 0.027 |
| 7002C | 15 | 32 | 9 | 17000 | 24000 | 6.24 | 3.39 | 0.039 |
| 7002AC | 15 | 32 | 9 | 17000 | 24000 | 5.97 | 3.24 | 0.039 |
| 7003C | 17 | 35 | 10 | 16000 | 22000 | 6.61 | 3.81 | 0.051 |
| 7003AC | 17 | 35 | 10 | 16000 | 22000 | 8.23 | 4.53 | 0.051 |
| 7004C | 20 | 42 | 12 | 14000 | 19000 | 10.5 | 6.02 | 0.089 |
| 7004AC | 20 | 42 | 12 | 14000 | 19000 | 10 | 5.74 | 0.089 |
| 7005C | 25 | 47 | 12 | 12000 | 17000 | 12.9 | 8.58 | 0.103 |
| 7005AC | 25 | 47 | 12 | 12000 | 17000 | 11.1 | 7.08 | 0.103 |
| 7006C | 30 | 55 | 13 | 9500 | 14000 | 15.1 | 10.3 | 0.150 |
| 7006AC | 30 | 55 | 13 | 9500 | 14000 | 14.4 | 9.83 | 0.150 |
| 7007C | 35 | 62 | 14 | 8500 | 12000 | 16.3 | 12.1 | 0.207 |
| 7007AC | 35 | 62 | 14 | 8500 | 12000 | 15.5 | 11.5 | 0.207 |
| 7008C | 40 | 68 | 15 | 8000 | 11000 | 20.1 | 15.2 | 0.247 |
| 7008AC | 40 | 68 | 15 | 8000 | 11000 | 19 | 14.4 | 0.247 |
| 7009C | 45 | 75 | 16 | 7500 | 10000 | 25.9 | 20.4 | 0.310 |
| 7009AC | 45 | 75 | 16 | 7500 | 10000 | 24.5 | 19.3 | 0.310 |
| 7010C | 50 | 80 | 16 | 6700 | 9000 | 26.6 | 21.9 | 0.350 |
| 7010AC | 50 | 80 | 16 | 6700 | 9000 | 25.2 | 21.4 | 0.350 |
| 7011C | 55 | 90 | 18 | 6000 | 8000 | 37.2 | 28.6 | 0.470 |
| 7011AC | 55 | 90 | 18 | 6000 | 8000 | 35.2 | 27.2 | 0.470 |
| 7012C | 60 | 95 | 18 | 5600 | 7500 | 38.2 | 32.6 | 0.500 |
| 7012AC | 60 | 95 | 18 | 5600 | 7500 | 36.2 | 31.6 | 0.500 |
| 7013C | 65 | 100 | 18 | 5300 | 7000 | 40.1 | 35.4 | 0.540 |
| 7013AC | 65 | 100 | 18 | 5300 | 7000 | 38 | 34.1 | 0.540 |
| 7014C | 70 | 110 | 20 | 5000 | 6700 | 48.3 | 43.2 | 0.810 |
| 7014AC | 70 | 110 | 20 | 5000 | 6700 | 45.7 | 42.7 | 0.810 |
| 7015C | 75 | 115 | 20 | 4800 | 6300 | 49.5 | 48 | 0.860 |
| 7015AC | 75 | 115 | 20 | 4800 | 6300 | 46.8 | 45.5 | 0.860 |
| 7016C | 80 | 125 | 22 | 4500 | 6000 | 58.5 | 56.8 | 1.110 |
| 7016AC | 80 | 125 | 22 | 4500 | 6000 | 55.4 | 55.1 | 1.110 |
| 7017C | 85 | 130 | 22 | 4300 | 5600 | 62.5 | 61.7 | 1.250 |
| 7017AC | 85 | 130 | 22 | 4300 | 5600 | 59.2 | 59.2 | 1.250 |
| 7018C | 90 | 140 | 24 | 4000 | 5300 | 71.4 | 71.7 | 1.580 |
| 7018AC | 90 | 140 | 24 | 4000 | 5300 | 67.6 | 68.6 | 1.580 |
| 7019C | 95 | 145 | 24 | 3800 | 5000 | 73.6 | 77.1 | 1.670 |
| 7019AC | 95 | 145 | 24 | 3800 | 5000 | 69.5 | 71 | 1.670 |
| 7020C | 100 | 150 | 24 | 3800 | 5000 | 79.4 | 81.3 | 1.720 |
| 7020AC | 100 | 150 | 24 | 3800 | 5000 | 75.1 | 77 | 1.720 |
| 7021C | 105 | 160 | 26 | 3600 | 4800 | 88.5 | 88.8 | 2.160 |
| 7021AC | 105 | 160 | 26 | 3600 | 4800 | 83.8 | 84.2 | 2.160 |
| 7022C | 110 | 170 | 28 | 3400 | 4600 | 100 | 102 | 2.710 |
| 7022AC | 110 | 170 | 28 | 3400 | 4600 | 95.5 | 97.2 | 2.710 |
| 7024C | 120 | 180 | 28 | 2800 | 3800 | 108 | 110 | 2.940 |
| 7024AC | 120 | 180 | 28 | 2800 | 3800 | 102 | 105 | 2.940 |
| 7026C | 130 | 200 | 33 | 2600 | 3600 | 128 | 135 | 4.430 |
| 7026AC | 130 | 200 | 33 | 2600 | 3600 | 122 | 128 | 4.430 |
| 7028C | 140 | 210 | 33 | 2200 | 3200 | 140 | 145 | 4.700 |
| 7028AC | 140 | 210 | 33 | 2200 | 3200 | 140 | 150 | 4.700 |
| 7030C | 150 | 225 | 35 | 2200 | 3200 | 160 | 155 | 5.490 |
| 7030AC | 150 | 225 | 35 | 2000 | 3000 | 152 | 168 | 5.490 |
| 7032C | 160 | 240 | 38 | 2000 | 2800 | 200.1 | 219.4 | 6.670 |
| 7032AC | 160 | 240 | 38 | 2000 | 2800 | 189.6 | 209 | 6.670 |
| 7034AC | 170 | 260 | 42 | 1800 | 2600 | 198 | 227 | 8.920 |
| 7036AC | 180 | 280 | 46 | 2400 | 3000 | 212 | 253 | 11.280 |
| 7038AC | 190 | 290 | 46 | 2300 | 2800 | 217 | 268 | 12.1 |
| 7040AC | 200 | 310 | 51 | 2100 | 2600 | 244 | 309 | 15.59 |
| 7044AC | 220 | 340 | 56 | 1900 | 2400 | 267 | 353 | 18.5 |
| 7048AC | 240 | 360 | 56 | 1700 | 2200 | 273 | 375 | 19.7 |
| 7052AC | 260 | 400 | 65 | 1500 | 1900 | 325 | 478 | 28.7 |
40+ YEARS EXPERIENCE
With over 40 years experience of the bearing manufacturing, we know how to make good bearings.
We can produce high quality products at less cost consistently and efficiently.
PACKING METHODS
1, Inner package
Corrosion and Dust Proof PE plastic film / bag packing + Tube packing, or Wrapping tape for larger bearings
2, Outer package
Corrugated carton + Wooden pallet
1, About the lead time.
This depends on several factors, like Is the production schedule tight? Is there a corresponding model in stock, and is there enough of this model in stock? How many pcs of that model would be ordered?
Simply speaking, based on a 20' GP container load:
| If the model your Preferred is | Sufficient stock | Lead Time |
| Regular models | YES | Within 7 days |
| Regular models | NO | Within 30 days |
| Non-regular model | NO | About 50 days |
For accurate estimate, please contact with our sale stuff. Thanks.
2, Minimum order quantity.
For DGBB or Insert bearings, our minimum order quantity is one pallet, regardless of whether the order is for one model or several. But, for angular contact bearings, the MOQ is ONE piece.
3, If you don't know which model is the right choice...
We would like to give you some advise if you like, according to the real situation and demand of your local market. Our purpose is to help you to get proper and right models for your customers, so that you would make a better sales and income finally.
