Product name: HELLO second generation lithium battery tattoo pen
Net weight: round: 209g square: 206g gross weight: 345g
Size: 153 * (battery part square 32mm, round 33mm),
Structure: Built-in lithium battery, integrated tattoo pen, the middle half can be unscrewed to replace the upper half of the lithium battery;
Applicable: 1. Android USB data cable 2. Most of the integrated needles on the market (Xia'an standard size) 3. The configuration does not have a charging head, you can directly use the mobile phone charging head;
Product parameters:
1. Material: aluminum alloy;
2. Craftsmanship: CNC integrated carving;
3. Charging interface: Android USB cable interface;
4. Battery capacity: 1800mA (mA);
3. Charging time: fast charging,fully rechargeable in 1.5-2 hours without electricity;
3. Use time: the output current is 2.0A, under normal 8V voltage, it can work continuously for more than 7 hours, the voltage is stable, and it can be used for about 8 hours for intermittent use;
4. LCD display content: working time count (hour-minute count) + two-digit output voltage + battery capacity;
5.Motor: hollow cup motor (9V12000 rpm);
6. Travel: 0-0.35mm;
7. Starting voltage: with memory function, the starting voltage is the value of the last shutdown voltage;
8. Working voltage range: 5-12V;
Instructions for use:
The device is a tattoo pen with a built-in lithium battery, which can be used directly without foot pedals and hooks. It consists of two parts: 1. upper half lithium battery power supply 2. lower half tattoo pen; the middle part can be unscrewed and replaced , The specific functions are as follows:
1. Power on: long press the middle "O" button for 5 seconds to turn on, and then long press for 5 seconds to turn off;
2. Pause: Short press the "O" key during normal work to pause the work, then press again to resume the working state;
3. Adjust the voltage: adjust the voltage level by pressing the "+" or "-" key, each press to adjust 0.5V, the minimum voltage: 5V, the maximum voltage 12V;
4. Battery display: It is displayed on the LCD screen, it is full of 4 grids, and it needs to be charged when the last power is left;
5. Daily charging: external charging port, you can use the Android USB cable to charge;
6. Lithium battery warranty: one year warranty, the upper half of the lithium battery can be purchased separately for replacement;
Power parameters:
1. Input: The device is charged through the USB charging port, and then the lithium battery is used for power storage. The built-in battery is 3 pieces, 600mA / piece, and 3.7V battery;
2. Output: The output current is fixed at 2A, and the lithium battery releases the power by starting the key, and supplies power to the built-in motor to start the tattoo pen. Voltage range: (5-12V) Press the "+" or "-" key to switch the voltage range, 5V is the lowest voltage, 12V is the highest voltage, each adjustment range is 0.5V;
3. Electricity storage: Charging through the matched USB data cable, it can be fully charged in 1.5-2 hours under normal power-off state, full charge is 4 grids, and it can be used normally for more than 7 hours when the 8V is turned on. When the last grid of electricity is left, it needs to be charged to ensure the normal use of the next;
Complaint
