Complaint
FeaturesExcellent dust-proof performance with separate compartment design Built-in LiFePO4 lithium battery Intuitive display of battery SOC via 5-bar indicator lights Multiple DC output ports (5VDC/3A ports, 12VDC/2A ports, Type C ports) Build-in bluetooth module Large-sized LCD screen to monitor and modify system parameters Optional 4G or WiFi module to remote control the inverter/charger by the RS485 com. port AC input overload relay for disconnecting from the grid when the fault occurs Circuit breaker on PV input for equipment safety Circuit breaker on battery output for battery safety AC charging with PFC technology, high power factor for efficient energy consumption Bidirectional high-frequency transformer isolation topology Advanced MPPT technology: maximum tracking efficiency≥99.5% EMC design on AC output to avoid interference with AC load Long-term continuous operation at full power Pure sine wave output Comprehensive electronic protection |
Model | HPS1522-AHL0310 |
Utility Input | |
Switch Response Time | Switch Response Time-Utility to Inverter: ≤20ms Switch Response Time-Inverter to Utility: ≤20ms |
Utility Voltage | 200~240VAC |
Failure Voltage | 290VAC |
Utility Frequency | 7A@220VAC |
Inverter Output | |
Inverter Rated Power (@25ºC) | 1500W |
4-second Transient Surge Output Power | 2700W |
Output Voltage Waveform | Pure sine wave |
Output Voltage Harmonic Distortion Rate | ≤3% (Resistive load) |
Solar Controller | |
PV Maximum Input Withstand Voltage | 95VDC (at minimum operating environment temperature) |
Solar Controller Type | MPPT |
MPPT Maximum Efficiency | ≥99.5% |
MPPT Voltage Range | 24~76VDC |
PV Maximum Charging Current | 30A |
Battery | |
Battery Type | LFP8S2P |
Battery Rated Capacity | 60A |
Cycle Times | 2000 times |
Other | |
Enclosure | IP30 |
Communication Method | Bluetooth, RS485 (WiFi optional) |
Warranty | Two years |
