Complaint
HRF1000 is a radar flow meter based on microwave technology. It's mainly used to measure the water flow in open channels in irrigation areas adopting anon-contact manner. According to the built-in software model and algorithm,it calculates and outputs real-time instantaneous flow and cumulative flow at across-section.
It is used as a data terminal for remote measurement or detection. This flowmeter uses high-precision radar to measure water level and flow velocity, uses our own irrigation channel model to calculate water measurement, and considers the influence of the surrounding environment of the open channel for correction.
| Velocity range | 0.1~20m/s(Depending on current conditions) | |
| Velocity measurement accuracy | ±1%F.S | |
| Speed resolution | 0.01m/s | |
| Measuring range | 0.1~7m | 0.4~40m |
| Distance measuring accuracy | ±5mm | ±1cm |
| Current(12V power supply) | Normal working mode: <130mA Standby mode: <1mA | Normal working mode: <240mA Standby mode: <1mA |
| Distance resolution | 1mm | |
| Antenna | Velocity:14×32° Water level:11×11° | |
| Intervals | 1~5000min | |
| IP Rating | IP68 | |
| Operating temperature | -40~85ºC | |
| Operating Voltage | 7-28VDC | |
| Transmit frequency | Velocity: 24.000~24.250GHz Water level: 60.5GHz | |
| Communication port | RS485/RS232(Reserved) | |
| Communication protocol | ModBus-RTU/Self-defined ASCII protocol | |
01. Non-contact measurement, safety and low-loss, less maintenance, not affect by sediment
02. Measurement operation and interval mode are combined to save energy and reduce consumption
03. Multiple interfaces are provided to facilitate access to the platform system
04. Multiple communication protocols for different users
05. Simple installation, less civil works
Q:What kind of products do you offer ?
A:We supply pressure sensor, level sensor, flow meter and digital controllers. Main market is European countries, American, the Middle East and Asia. Certificates are international ones.
Q:Could I get samples?
A:Yes,we have materials in stock to help you to get the samples as soon as we can.
Q:How about the quality of the magnets?
A:We have the certification of ISO, Europe standard ATEX, TUV-CE and ROSH,we could send the certification test of our company to you. Q:Could you provide me the shortest lead time?
A:We have materials in our stock,if you really need,you can tell us and we will try our best to satisfy you.
Q:Could I visit your factory?
A:Of course,if you need we will help you to visit our factory.
Q: How can I get the quotation or send my inquiry to?
A: Send your inquiry to us by the inquiry from on the right-side or the bottom of this page.
