Complaint
750Mbps Dual-Radio High Power Ceiling Wireless Access Point Controller Managed
Product Description:
A770-P48 11ac Ceiling Wireless Access Points based on SNMP/CAPWAP Protocol, it is specifically designed to operate in Residential and commercial applications. Comply with IEEE 802.11ac/n/g/b standard, it is 2.4GHz and 5GHz dual radio, with data rate up to 733Mbps(300Mbps in 2.4G, 433Mbps in 5G), enable users to enjoy more stable and faster Ethernet surfing even access into 100+ end users; Tested 101 concurrent end users.
Equipped with Qualcomm Chipset, 500mW high RF Power and high gain 5dBi antenna, it is 4x Wi-Fi Range than normal wireless router or wireless access points, tested in 6 hotel room Wi-Fi Range.
Build in advanced Wi-Fi channel analysis tool, adjustable RF Power, clients isolation, tag VLAN, it can applied in different environment with stable and safety performance.
Applications
This high power, dual radio and high speed wireless access point can be deployed in a wide array of situations for both residential and commercial applications.
Residential Applications:
DC Power available, Adjustable RF Power based on room range; Then support Gateway operation mode, no need more wireless router; What's more, support cloud server access for remote control, to provide effective wireless connectivity.
Commercial Applications:
Support PoE, High RF Power with 6 hotel room Wi-Fi range, 100+ end users, work as wireless AP and managed by WLAN Controller, public applied in hotel, school, shopping mall in mass installation.
| Wireless: | |
| Standard | 802.11ac/b/g/n, MIMO technology |
| Speed | 433Mbps compatible with 5.8GHz 300Mbps b/g/n for 2.4GHz |
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM DSSS = DBPSK, DQPSK, CCK |
| Channel | Ch.1-13 for 2.4GHz Ch.36-165 for 5.8GHz |
| Frequency band | 2.412GHz-2.472 for 2.4GHz 5.180GHz-5.825Ghz for 5.8GHz |
| Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption |
| RF Power: | |
| RF Power | 2.4G: 11n @MCS7:22±2DB, @MCS0:24±2DB. 11g @54M:23±2DB, @6M:25±2DB. 11b @11M:25±2DB, @1M:27±2DB. 5.8G: 11a @54M:22±2DB, @6M:24±2DB. 11n @MCS7:20±2DB, @MCS0:22±2DB. 11ac @MCS9:19±2DB, @MCS0:21±2DB. |
| Receive Sensitivity | 2.4G: 11n: -70dbm@MCS7, -88dbm@MCS0. 11g: -72dbm@54Mbps, -88dbm@6Mbps. 11b: -85dbm@11Mbps, -94dbm@1Mbps. 5.8G: 11a: -72dbm@54Mbps, -90dbm@6Mbps. 11n: -70dbm@MCS7, -90dbm@MCS0. 11ac:-60dbm@MCS9, -86dbm@MCS0. |
| EVM | 11n: ≤-28 DB 11g: ≤-25 DB 11b: ≤-10 DB 11a: ≤-25 DB |
| Hardware: | |
| Chipset | Qualcomm QCA9531 + QCA9887 |
| Memory | 128MB DDR2 RAM |
| Flash | 16MB |
| Interface | 1 * 10/100Mbps RJ45 WAN Port |
| 1 * 10/100Mbps RJ45 LAN Port | |
| 1 * Reset button, press 15 seconds to revert to default setting | |
| Antenna | Build in 5dBi MIMO Antenna |
| Power consumption | PoE: A770-P48: IEEE 802.3af, 15W(Full Load) DC: 12V/1.5A |
| Software | |
| Standard Version | Bandwidth: 20Mhz, 20/40Mhz, 80Mhz |
| Operation Mode | Gateway, Wireless AP, Repeater, WISP |
| SSID No | 4 SSID for 2.4G, 4SSID for 5.8G |
| Factory Default Setting | Yes |
| Centralized Management by AC Controller | Yes |
| Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter IP and MAC Address Binding |
| Protocols | IPv4 |
| Others: | |
| Package Contents | 750Mbps Dual Band wireless access point Ethernet Cable Quick Installation Guide Setting Accessory |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux |
| Environment | Operating Temperature: -20~55 ºC Storage Temperature: -40~70 ºC (-40 ºF~158ºF) Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing |
