1. Product Introduction
CA400 Multi-wire Saw is mainly used for batch processing of Sapphire, Quartz Crystal, Special Ceramics, Silicon Nitride, and other super hard and brittle materials into straight sheets. The machine adopts a workpiece swing design to reduce cutting area and improve cutting speed, showing economy and practicality while ensuring processing efficiency, operational stability, and process applicability.
2. Features
-The rollers adopt a double-cone-positioned structure for convenient assembling and disassembling.
-8 wire guide wheel design to reduce wire break rate and wind diamond wire easily.
-Swing slicing design for stronger cutting force.
-Underside workbench for easier operation.
-The cutting room is open on 3 sides for easier operation and maintenance.
-Wire break memory system.
4. Parameter
Item | Detail | Parameter |
Model | Model | CA400 |
Ability | Maximum work size L*W*H | φ125mm*260mm |
Roller | Out diameter *Workable width | φ145±10*266mm*3Rollers |
Diamond wire | Wire diameter | φ0.12mm-φ0.25mm |
Storage | 20km(φ0.25mm) | |
Maximum running speed | 900m/min | |
Workbench | Travel of workbench | 150mm |
Workbench swing angle | ±7° | |
Lift speed | 0.1-99.9mm/min | |
Cutting method | Vertically upward | |
Number of workbenches | 1 | |
Cutting fluid | Fluid | Water-based or oil-based cutting fluid |
Storage | 220L | |
Flow rate | 200L/min | |
Power & Air supply | Power supply | 380V±10% 50Hz |
Power | 30kw | |
Air supply | Adopting water-based cutting fluid, the air pressure is ≥ 0.35 MPa. | |
Size & Weight | Size L*W*H | 3100mm*1490mm*2360mm |
Weight | 4000Kg |
Company Profile