| Item | Specification | Remarks |
| Unit | Cell type | LFP50160118-102Ah | |
| Size | 50mm*160mm*118mm | |
| Nominal voltage | 3.2V | |
| AC Resistance | R=0.3mΩ | |
| Rate capacity | 102Ah | |
| System | Platform voltage | 51.2V | |
| Size | 600mm×400mm×178mm | LxWxH(without handle) |
| Charge port | Energy storage connector | |
| Discharge port | Energy storage connector | |
| MODBUS | RS485 CAN | |
| Series parallel mode | 16s1p | |
| BMS | 51.2V100A stored energy BMS | |
| Weight | 50KG | |
| Maximum continuous discharge current | 100A | |
| Instantaneous discharge current | 110A | It could cause irreversible damage when over 110A |
| Limited charge voltage | 58.4V | |
| Charging platform voltage | 51.2V | |
| Discharge cut down voltage | 40V | |
| Optimal operating temperature range | 10-35ºC | |
| Discharge temperature range | -30-+60ºC | If the battery surface temperature exceeds this range, stop discharging. |
| Charge temperature range | -10-+55ºC | If the battery surface temperature exceeds this range, stop charging. |
| Storage temperature range | -10ºC-+30ºC | The recommended ambient temperature for long-term storage is 25ºC±2ºC |
| Cycle life | ≥5000cycles | 100% depth charge and discharge at 0.33C rate |
| Hull | Sheet metal spraying | |
| Accessory | GPS | 304 Stainless Steel handle | |
| Charger | / | |
Complaint
