750ml Canned Line Mark Spray paint for Road Marking

Min.Order: 7,500

Product origin: Shenzhen, Guangdong, China

Infringement complaint:

Complaint

US$ 1.55 ~ 1.95

Description

LINE MARKING SPRAY PAINT

RONFIX® Line Marking Spray Paint is perfect for reinvigorating tired parking lines, grass pitches, these 750ml (25fl oz) aerosol spray cans evenly distribute quick-drying, acrylic paint onto all surfaces. Available mark out spray paint in a diverse range of seven colors. Extremely quick-drying, improved further by an impressive new formula, the marking out paint allows you to spontaneously mark out impromptu courts, for sport or recreational use. The marking out spray paint is also suitable for car parks or temporary road markings. The latest formula also boasts brighter coloring and longer-lasting markings than ever before, perfect for extended use.

For more aerosol line marker colors, please download the RONFIX® color card, welcome to customize the colors you need

LINE MARKING SPRAY PAINT FEATURES & BENEFITS

Mark out spray paint cans hold 750ml (25fl oz) of paint.
New and improved formula gives a brighter and longer lasting finish than other similar.
products.
Acrylic paint is solvent based and lasts for 3 months.
Mark out spray paint is suitable for all surfaces.
Drying time approximately thirty minutes for sport or recreational use.
Car parks and roads need approximately two hours of drying time.
Colours: Black, blue, green, orange, red, yellow and white.
Available individually, in packs of six and packs of twelve.
1x 750ml can will mark out approximately 100m.

LINE MARKING SPRAY PAINT APPLICATIONS

The mark out spray paint is suitable for car parks or temporary road markings or impromptu courts, for sport or recreational use.

DIRECTION OF USING LINE MARKING SPRAY PAINT

Read entire label before using aerosol line marker.

1 Construction site cleaning: remove the dust, sand, debris, etc. on the surface of the base to be constructed, and keep the construction coating surface clean; the old coating that is loose, shelled, and brittle on the surface should be removed.

2 Construction site planning: Use a pre-bouncer to pre-bounce thin lines in the area to be marked to guide the advanced direction of the scribing cart (or the correct paste of the special template for scribing and textured paper).

3 Product preparation: Shake the spray tank up and down, left and right for 20 to 30 times, until the liquid in the tank is fully mixed.

4 Installation: Install the spray can upside down and vertically on the cylinder of the scribing cart, confirm that the nozzle is aligned with the card position at the bottom of the cylinder, and carefully check the parts to ensure that the spray can is installed firmly in place.

5 Scribing: first test spray outside the construction site, check and confirm that the width and coverage of the scribing meet the requirements, and then implement the scribing along the guide line.

PHYSICAL & CHEMICAL PROPERTIES OF MARK OUT SPRAY PAINT

PHYSICAL & CHEMICAL PROPERTIES

Appearance	Aerosol	Odour	Organic solvents
Colour	Various colours	Vapour pressure	4.5 bar @ 20°C
Melting point	No information available	Vapour density	No information available
Initial boiling point and range	No information available	Relative density	1.25-1.35 @ 20°C Density of paint base
Flashpoint	Not available	Solubility(ies)	Partially soluble in water
Auto-ignition temperature	No specific test data are available	Viscosity	No information available
Comments	A flashpoint method is not available but the major hazardous component, the Propellant has a flashpoint of <-60°C with flammability limits of 10.9% vol. upper and 1.4% vol. lower.
Volatile organic compound	This product contains a maximum VOC content of 717 g/l.