High Satisfaction Save Energy Intelligent Control Injection Control Injection Machine with Iml Make Container

TECHNICAL PARAMETER TABLE		A	B
Screw diameter	mm	45	50
Screw L/D ratio	L/D	24	22
Injection capacity in theory	cm3	341	422
Injection weight (Ps)	g	311	384
Injection pressure	MPa	199	161
Injection speed	mm/s	260
Plasticizing Capacity	g/s	46	57
Screw speed	r/min	400
Clamping force	kN	2000
Opening stroke	mm	500
Max mold height	mm	580
Min mould height	mm	200
Space between tie-bar	mm	570*520
Ejector force	kN	80
Ejector stroke	mm	150
Ejector No	n	9
Pump pressure	MPa	17.5
Motor power	KW	45
Heating power	KW	16.8
Machine dimension	m	6.34*1.56*1.93
Machine weight	t	8.7
Oil tank capacity	L	410

HIGHSUN thin-wall high speed IMM series is based on years of experiment and researching,specifically for the molding cycle is short,high speed injection molding requirement products,Outstanding performance in the aspects of motion characteristics,machine precision,sevice life and so on.Widely used in packaging,medical and 3C electronic products.
Product advantages:
1.With CANbus EtherCAT bus communication,the compuer sustem is full digital controlled.
2.The temmperature contral adopts special control module,The accuracy can achieve 1 degree.
3.With the power monitoring function,it can monitor the current energy consumption during the production.
4.The special single cylinder strcture drastically reduces the return-oil amount during the high speed injection.At the same time,it reduces the return-oil pressure,In this way,it increases machine injectuib acceleration.
5.In using the graphite steel sets as well as thin oil lubrication,the bent elbow connecting rods and guide bars have better bearing resistance and abrasive resistance,The machine has a longer service life.
6.Controlled by the proportional direction valve,The movement can accelerate quickly.During the high speed running,it can operate steadity and precisely control the mold open position.
7.The hydraulic system adopts double servo drive control.It has the advantages of high effciency,energy saving and low noise.Meanwhile,it can realize mold-open and charge sunchronization function.