Good Factory Low Gi Customize Prime Hot Roll Big No Spangle S235jr Dx51d+Z30dipped Band Tape Galvanized Steel Plate Price

Min.Order: 3,000
Product origin: Binzhou, Shandong, China
Infringement complaint: complaintComplaint
US$ 0.59 ~ 0.62

Description
Product Description

Zhengde Galvanized steel plate is a thin sheet of metal coated with zinc to prevent corrosion on the surface of the steel plate and extend its service life.
Galvanized steel plates can be divided into the following categories according to production and processing methods:
Hot dip galvanized steel plate. A thin steel plate that is immersed in a molten zinc bath to adhere a layer of zinc to its surface.
Alloyed galvanized steel plate. This type of steel plate is also manufactured using the hot dip method, but immediately after being removed from the groove, it is heated to around 500 ºC to form an alloy coating of zinc and iron.
Electrogalvanized steel plate. Manufacturing this galvanized steel plate using electroplating method has good processability.
Single sided and double sided differential galvanized steel plates. Single sided galvanized steel plate refers to a product that is only galvanized on one side.
Alloy and composite galvanized steel plate. It is a steel plate made of zinc and other metals such as lead, zinc, and even composite plating.
Hot dip galvanized and cold rolled low-carbon steel plates and stripscommercialsnap-shaped(CQ)St01ZPTSGCCSt01ZDX51D+ZCQ1.Suitable for manufacturing products with simple shapes;
St02ZJYSt02ZLFQ2.It is suitable for the manufacture of mechanical snap-fit products.
   (CS-A,B,C/FS-A,B) 
stamping(DQ)St03ZSCSGCD1St03ZDX52D+ZDQSuitable for drawing, stamping and forming products and thickness>0.9mmrolled bite products.
(DDS)
deep drawing(DDQ)St04ZCSSGCD2St04ZDX53D+ZDQ1.Suitable for manufacturing high deformation performance, deep drawn products and products with complex shapes
St05ZSGCD3St05ZDQSK2.Coating thickness should generally not exceed275 g/m2
   (DDS) 
Hot rolled original plateSt01ZR SGHC    
St02ZR
Structural plateStE280-2ZJGSGC400StE280ZS280GD+ZSQ-275,340 (SS-275,340)It is suitable for structural products with mechanical properties and technological properties in the supply state of steel plates and steel strips.
StE345-2ZSGC440StE350ZS350GD+Z
Galvanized and cold-rolled low-carbon steel plates and stripscommercial gradeSECCDX1SECCSt12ZEDC01ZECQSuitable for general purposes, can be used to make car bodies, furniture product shells, etc.
(CS)
stamping gradeSECDDX2SECDRRSt13ZEDC03ZEDQIt is suitable for products with molding and certain corrosion resistance requirements.
(DS)
Deep drawingSECEDX3SECESt14ZEDC04ZEDQSKIt is suitable for products that are difficult to form and have complex deformations.
DC05ZE(DDS)
Super deep drawing    DC06ZE It is suitable for parts with extremely complex deformation, such as car boxes.
Structural plate DX4SEFC370  SQIt is suitable for parts that require comprehensive performance and can be processed, such as purlins on buildings.
(SS)
Our Advantages
WIDE APPLICATION
Generally speaking, only structural, tensile, and deep drawing galvanized sheets have tensile performance requirements. The structural galvanized sheet requires yield point, tensile strength, and elongation, etc; Only elongation is required for stretching.
Bending test is the main item to measure the process performance of thin plates, but the requirements for various galvanized sheets are not consistent in national standards. Except for structural grade, American standards do not require bending and tensile tests.
SUFFICIENT STOCK
Galvanized steel plate manufacturers have a complete range of specifications for direct sales, with a stock of 10000 tons. Various materials and standards of galvanized steel plates can also be produced according to customer requirements.
Attention to detail
Zhengde Galvanized steel plate Z-normal zinc flake: Zinc flake obtained by crystallization at normal cooling rate, can be used for general purposes: X-small zinc flake: The cooling rate is specially controlled, and the size of zinc flake is smaller than that of normal zinc flake, suitable for painting and other occasions where normal zinc flake cannot meet the requirements; GZ Finish Zinc Flower: Small zinc flowers have undergone finishing treatment and are suitable for deep drawing and ultra deep drawing processing, as well as occasions with low surface roughness requirements.
Provide deep processing
Galvanized corrugated board is a corrugated board made by rolling the surface of steel. For its standard form, there is a clear definition in the standard, that is, galvanized corrugated board is a structural board that is bent out of a series of ready-made hexagons after surface treatment by the galvanized person, has a certain bearing capacity, and can be used in buildings. Due to the lack of joints in galvanized corrugated boards, they overcome the shortcomings of traditional building structures and are easy to disassemble, move, and install.

Quality first: production and inspection in strict accordance with production standards;
Price advantage: discounts based on real market prices;
Transaction security: There will be no loss of customer funds;
After-sales guarantee: the customer's problem is our problem;
Long-term cooperation: quality assurance, price advantage, sincere service can last for a long time.
Detailed Photos

Packaging & Shipping

Company Profile

Shandong Zhengde Metal Manufacturing Co., Ltd. is a production and sales company integrating hot-rolled steel coils, cold-rolled steel coils, galvanized steel coils, color-coated steel coils, section steel, steel pipes, steel wires, metal mesh, stainless steel, aluminum, copper and other metal products integrated large enterprises. Five production and sales bases have been formed in Binzhou, Liaocheng, Wuxi, Tianjin, Jinan and Tai'an, with more than 100 production lines, 4 nationally recognized laboratories, 2 technical engineering centers, and 5 enterprise technology centers. Products are exported to more than 50 countries and regions such as North America, South America, Europe, Africa, Oceania, Middle East, and Southeast Asia.

Certifications

FAQ

1.You are a manufacturing or trading company?
---We are manufacturer. And we have years of export experience. We can ofer competitive price.

2.What quote do you offer?
---FOB&CFR&CIF and others ways according the your needs.

3. Can I have a trial order only several tons?
---Of course, We can ship the cargo for you with LCL (Less container load).

4.Can we print our own logo ?
---Yes, we can print logo for you.

5.How pay?
---T/T L/C or as you requested.

6. What is your MOQ?
---It is 3 ton each size for PPGI.

7. Do you provide samples?
---Yes. We could offer the sample by free but you should pay the freight cost

8.What is the quality of your products guarantee?
---We can offer the material testing report before the shipment.

9.Do you have after-sales service?
---Certainly. you can contact us at any time.

Product Tag:
Related categories:
Scroll to Top