Description
FC32-LC Thermal Transfer Overprinting (TTO)Thermal Transfer Overprinting (TTO) is a technology that creates messages in resolutions up to 203dpi 300dpi by pushing a ribbon into contact with a substrate using a printhead.The printhead is made up of a series of miniature print elements under a ceramic coating and a layer on the thermal printer ribbon is covered with a coloured wax and/or resin mixture. The mixture on the ribbon melts as small areas of it come into contact with the elements that are heated, this transfers and adheres colour to the surface of the substrate as it moves under the printhead.Thermal transfer printers, functional in either continuous or intermittent printing modes, can print at high-resolution print quality and on fast moving production lines. They can print a series of messages, including pricing, date and time coding, barcodes, QR codes, logos, ingredients' lists or even marketing messages.- Cost Saving20mm to 50mm ultra wide ribbon to optimize ribbon usage
Patented ribbon saving features help to minimize ribbon waste.
Low-cost 32mm TPH for option, which meets the demand of less-than-35mm ribbon usage
Max. 1100-meter ribbon with less replacement to save printing cost
- Optimize OperationObtain availability, ribbon status and broken dots detection at real time
Standard 1100-meter ribbon brings longer running time
Smart data input function makes working management more convenient and safer so as to minimize errors
With simple information design software "Format Designer"
- High ReliabilityCost-effective TPH warranty service
Solid and reliable structure: without any quick-wear parts in ribbon cassette design
High time availability
IP protection options for harsh environmental conditions and high-pressure watering
-
Highly Efficient PrintImported smart TPH, with the function of auto setting and broken dots detection to ensure best print quality
Each package can have the exclusive coding
Print speed up to 600mm/s
High resolution of 300dpi
- Eco-FriendlyPint at 2.5 bar pressure, and the loss of compressed air for each printing is as low as 0.4ml
Power consumption has decreased 50%
New standard ribbon design reduce 20% of ribbon waste
Power-saving function of controller improves the energy efficiency
Specification:Structure | All-metal structure |
Printing Method | Thermal Transfer Printing |
Resolution | 300dpi (12 dots/mm) |
Printing Speed | 40-600mm/s |
Printing Width | 32mm |
Print Area | 32mm*75mm (Intermittent) |
CPU | 32-bit RSIC |
Flash Memory | 8MB (minimun) |
Dynamic Memory | 16MB(minumum) |
Real-time Clock Function | STD (Battery Lifespan: min 3 years) |
Sensor | Ribbon Tension Detection Thermal Head Position Detection Cover Open Detection TPH over Temperature Detection Ribbon Break Detection |
Soft Package Detection | Electromagnetic Induction or Synchronizer |
Soft Package Material | PVDC, PET, PE, NY, CPP, OPP, BOPP, BOPET, BOPA, CPP, PE,VMPET, VMCPP and other films and composite films |
Capacity for Ribbon Loading | 1 "mandrel with a maximum length of 1100 meters |
Ribbon Type | Type: Wax / Resin-based width: 20 mm (0.79 ") to 55 mm (2.17") |
Ribbon Saving | Support interlaced, radial, multiple print signals, digital ribbon saving printing, ribbon back and other ribbon saving modes; The minimum ribbon interval between two lines of printing is not more than 0.5mm |
Air Pressure Supply | Max. 6 bar/90 psi |
Airflow Consumption | As low as 4 ml / print at 2.5 bar |
Print Density Level | Level 31 |
USB Interface | STD, 1 port, type B connector, USB device 2.0 |
USB HOST | STD, 1USB disk connection port ; USB Host 2.0, automatic detection and setting of connections |
Serial Port | STD 1 port, female D-SUB 9-pin connectorDefault 9600, 8/N/1, variable baud rate and format |
Ethernet Interface | STD 1 port, RJ-45 connector, IEEE802.3 10/100BASE-T |
Hardware Interface Port | Input: "Print Start" and a configurable input ; Outputs: fault, warning and 2 configurable outputs |
Power Supply | Internal switching power supply module, I / P: AC90V-264V, 47/63 Hz; 150 VA |
Software | HPRT Format Designer |
Certification | CCC |
Environmental Conditions | Operation: 0 to 40 ° C @ humidity 10% to 90% non-condensing Storage: -40 to 60 ° C @ humidity 10% to 90% non-condensing |
Machine Dimension | Printer: height less than 190 mm, width less than 220 mm, depth less than 236 mm Controller: height less than 170 mm, width less than 263 mm, depth less than 190 mm |
Machine Weight | Printer: less than 8 kg ;Controller: less than 5 kg |
Warranty | Printer: 3 years ; Controller: 3 years ; Thermal head: 6 months or 50 KM;Platen: 5 years |
Application:
Packing-TTO Printer:
Nice Comments:
Company Profile