Complaint
Highlight Point:
Energy Consumption is reduced 5-10%
2.Air Consumption is reduced 20-30%
3.Capacity is raised up 30% -35%
4.The Machine Output of each Cavity is 1800-2000BPH
5.Liner structure,modular design,easy maintenance
1.PLC control and automatic work It is supported by the arm on the ground,the air blower is settled
2.304 SUS machine frame on the air conveyor,each inlet of air conveyor has an filter to prevent
3.Automatic level control dust oming into ,it is the bridge between blowing machine and filler.
4.Stalbe water output
5.Low maintance and installation cost
Application: still water, pure water, RO water, mineral water, sparkling water, alcoholic drinks, wine, etc. Suitable for: PET bottles Filling system: gravity filling Production capacity: 3,000BPH - 40,000BPH (500ml)
Technical features of water filling machine
1. It is adopted that direct connection between air conveyor and inlet starwheel instead of screw and conveyor chains, which is easier for bottle changing.
2. There is no need to adjust the height of equipment through neck holding tech for bottle transportation. And what is only to change some spare parts.
3. The high-speed filling line is of clamp transferring technology. Bottle shapes are more varied, and the working table inside the machine is more laconic.
4. By 3-in-1 monoblock, the bottle goes through rinsing, filling and capping with little abrasion, and the transferring is stable, bottle changing is easier.
5. Specially designed stainless steel bottle clamp does not contact the thread parts of the bottleneck, avoiding the second contamination.
6. High speed and large flow filling valve assure the high filling speed and exact fluid level.
7. Spares contact with the liquid is all of excellent stainless steel or food level plastic. The electric system is of international brand and achieves the national food sanitary standard.
8. The bottle-out starwheel is of screw down shape. When bottle size is changed, there is no need to adjust the transferring chain's height.
9. Mistubish /Siemens control system,SKF/NSK Bearing
| Model-Rinser-Filler-Capper | 14-12-5 | 16-16-5 | 24-24-8 | 32-32-10 | 40-40-10 | 50-50-15 | 60-60-15 | 72-72-18 | 80-80-20 |
| Capacity ( BPH ) | 5,000 | 8,000 | 12,000 | 15,000 | 18,000 | 22,000 | 28,000 | 32,000 | 40,000 |
| SuitSuitable Bottle Size | Round and Square container Bottle diameter:50-120mm Bottle Height 160-320mm | ||||||||
| Power( kw) | 2.42 | 3.12 | 3.92 | 3.92 | 5.87 | 7.87 | 11.37 | 11.37 | 15.37 |
The containers are picked up by the infeed starwheel and transferred to the container table. The container rotation begins when they are positioned between container plates and centering bells.
The speed of the feed roller is adjusted to the required label length for continuous web tension. A standard threading unit ensures optimal film feed. In the cutting unit, the labels are precisely cut while a PLC command and servo-motor provide an exact cut-off point.
Two narrow strips of hot melt glue the labels together, which are applied by a heated glue roller to the leading and trailing label edges. The label with the glue strip on its leading edge is transferred to the container. This glue strip ensures an exact label positioning and a positive bond. As the container is rotated during label transfer, labels are applied tightly. Gluing of the trailing edge ensures proper bonding.
Process: Infeed bottle → pre-position →label cutting → gluing → labeling→ label by press out → finish
NO.6 Laser Printer No.6-2 Ink Jet Printer
Feature: Feature:
* Small in size with the integrated touch screen *Optimize Printintg effect
* High speed flying marking system *The nozzle is more stable
* Raster font, vector font for choosing * optimized and upgraded control system
* No limiting characters in the working area * Modular design
* Economical and low maintenance cost *can connect PC,PLC, online control
