Complaint
Personalized Barite Drum Scrubber Coarse Material Washer Sand Washer Ore Washer Trommel Scrubber
Trommel scrubber is widely used in all kinds of refractory bulk ore. The ore washing machine is divided into two types: cylinder type and cylinder sieving type. The latter one can divide the washed material into +40mm and -40mm products. The -40mm product can be further scrubbed by the double spiral trough type ore washer, and the material can be divided into +2mm and -2mm products. The combined ore-washing efficiency of the trommel scrubber and double spiral trough type ore washing machine can reach about 98%, which is a very effective ore-washing method.
The trommel scrubber uses rotating cylinders and internal scrapers and its own pebbles and rocks from the material to break up clay, lumps, and soft oxides. The cylinder of the washing machine rotates slowly, resembling a giant washing machine. Materials of different sizes churn in the drum together with water. In this way, useful minerals can be effectively released from muddy soil and clay.
After uniform distribution, the slurry material is sent to the end of the drum by cylinder and screened from the overflow port to the conical sieve. The conical sieve removes the material larger than the useful mineral size. The pulp under the sieve can directly enter various mineral processing equipment, such as mineral jig, centrifuge, sluice box, etc.
The cylinder body of the trommel scrubber is supported by four tugs, the motor drives the reducer, and the gears drive the cylinder body to rotate at low speed. Ore containing mud and stone powder is fed from the feed inlet into a rotating drum. The ore is continuously taken up and dropped by the abrasion-resistant rubber lining board installed in the roller at a certain Angle.
During the process of moving from the feed end to the discharge end, the ore is cycled many times and washed by the washing water in the forward or reverse direction. The cleaned ore is lifted and discharged into a double-layer conical sieve by a hoist and divided into coarse, medium, and fine grain grades. Wastewater containing sludge is discharged through the discharge end of the feed end with a hole baffle.
| Model | Max Feed Size(mm) | Capacity(t/h) | Dimension(mm) | Power(kw) | Weight(t) |
| YTXK1030 | 80 | 20-30 | Φ1000×3000 | 15 | 3.8 |
| YTXK1230 | 100 | 30-50 | Φ1200×3000 | 22 | 4.7 |
| YTXK1540 | 160 | 50-80 | Φ1500×4000 | 30 | 6.9 |
| YTXK1840 | 200 | 80-120 | Φ1800×4000 | 37 | 13.2 |
| YTXK2060 | 210 | 100-140 | Φ2000×6000 | 55 | 14.8 |
| YTXK2080 | 210 | 100-140 | Φ2000×8000 | 55 | 15.5 |
| YTXK2250 | 230 | 120-160 | Φ2200×5000 | 55 | 15.9 |
| YTXK2460 | 240 | 200-300 | Φ2400×6000 | 55 | 26 |
Factory
Henan Forui Machinery Technology Co., Ltd(formerly Gongyi Forui Machinery Factory) is founded in 1986. We are one of the leading suppliers of beneficiation process and equipments in Asia. Our mission is to become a world-class company leading the transformation of the mineral processing market. Our values are customer first, cooperation and sharing, integrity, and dedication.
After more than 30 years of hard work and innovation, we have developed into a leading professional manufacturer of mineral processing equipment in Asia. Our main business is gravity mineral processing about placer/alluvial gold ore, metal, non-metal, smelting slags, and waste, etc.
Projects Worldwide
The equipments we produce mainly includes mineral processing equipment, crusher and grinder, screening machine, ore washer, etc. Such as jig machine, log washer, trommel scrubber, vibrating screen, trommel screen, roll crusher, and rod mill, etc.
Global Customer Visits
Positive Feedback
The industrial indicators of all types of equipment have reached national standards and obtained the ISO9001 international certification. We are the partner that enables you to achieve more in the mineral processing industry.
Welcome to Download Supplier Assessment Report:
ISO 9001, CE, Patent Certificate
Patent Certificate
Q: How long has it been since your company opened?
Answer: Henan Forui Machinery Technology Co., Ltd was formerly known as Gongyi Forui Machinery Factory, our business has been in operation since 1986. For more than 30 years, we have provided the mining industry with a large number of beneficiation equipment for processing non-metals, ferrous metals, non-ferrous precious metals, smelting slag, etc.
Q: Are you a trading company or a manufacturer?
Answer: We are a manufacturer, not a trading company or distributor. Equipment sold directly by manufacturers can make prices more competitive.
Welcome to Download Supplier Assessment Report:
Q: Where is your factory located? Is the transportation convenient?
Answer: Our factory is located in Gongyi City, Zhengzhou City, the hinterland of the Central Plains of China. We have Xinzheng International Airport here. You can fly directly from Xinzheng International Airport to Beijing, Shanghai, Guangzhou and Shenzhen. Transportation is very convenient, welcome to visit our factory.
Q: What equipment do you produce?
Answer: We produce the following beneficiation equipment:
- Mineral processing equipment: 2LTC6109/8T mineral jig, LTA series jigging machine, AM30 mineral jig, FRT series jig machine, compound double movable sieve jig, gold washing plant, etc.
- Crushing and grinding equipment: jaw crusher, roll crusher, hammer crusher, fine crusher, rod mill, ball mill, gold round mill, etc.
- Screening equipment: trommel screen, vibrating screen, etc.
- Ore washing equipment: trommel scrubber, log washer, spiral washer, etc.
- Auxiliary equipment: vibrating feeder, plate feeder, etc.
Q: What beneficiation solutions do you provide?
Answer: We provide equipment and beneficiation solutions for processing the following ores:
- Non-metallic: fluorite, barite, garnet, diamond, ruby, sapphire, etc.
- Nonferrous metals: gold ore, antimony ore, lead zinc ore, tinstone, copper ore, mercury ore, sheelite/tungsten ore, wolframite ore, tantalum-niobium ore, etc.
- Ferrous metals: hematite, specularite, limonite, pyrite, chromite, manganese ore, etc.
- Smelting slag: ferrochrome slag, silicomanganese slag, Stainless steel slag(nickel slag), copper slag, lead zinc slag, antimony slag, aluminum ash slag, steel scoria, carbide slag, etc.
Q: How is the quality of your products?
Answer: Our company has ISO9001 international quality system certification, our equipment has applied for and obtained patents, and our products are manufactured in strict accordance with national and international standards. Before delivering the product, we will test each device to ensure its good operation.
Q: What is the price of your products?
Answer: For the same complete equipment, we can guarantee that our quality is the best when the price is the same as that of other competitors. And under the same standard and same quality, our price can be the best.
Q: How long is the warranty period of your equipment? Does your company provide spare parts?
Answer: Our equipment is guaranteed for 12 months (except for fast-wearing parts), and we provide customers with necessary spare parts. At the same time, we will provide customers with spare parts for life at the lowest cost.
Q: What are the trade terms?
Answer: FOB, CIF, CFR, etc. are acceptable.
We can accept wire transfers and letters of credit. Customers need to pay a 30% deposit first. Before delivery, customers need to pay the balance (70% of the order price), which is the practice of international trade. The finished picture will be sent to the customer before delivery.
Q: If the customer pays the deposit, how long will it take for the factory to ship the goods?
Answer: Normally, if it is in stock, it will be shipped in 3 to 5 days. Out of stock, it will be shipped in 15-20 days. The specific time depends on the number of devices.
Q: What is the shipping method of the factory? How long can the customer receive the goods after the factory ships the goods?
Answer: generally by sea. It takes about 45 days. The speed of shipping is relatively slow, which is an international practice.
Q: What are the nearest seaports to the factory?
Answer: Qingdao Port, Shanghai Port, Guangzhou Port, Shenzhen Port.
Q: Can I know the status of my order?
Answer: Yes. We will send you information and photos at different production stages of your order so that you can know the status of your order.
