Product Description | ||||
LNP ELCRIN WF006XiQ compound is based on Poly butylene terephthalate (PBT) resin utilizing ELCRIN iQ upcycling technology containing minimum 37% Post-Consumer Recycling (PCR) weight content and 30% glass fiber. Added features of this grade include: Excellent Strength, Stiffness and Dimensional Stability. Potential applications may include handles, connectors. | ||||
General | ||||
Form Resin Pellets | ||||
Filler 30 % Glass Fiber | ||||
Feature | Good Dimensional Pcr | Good Hardness 37 % Pcr | ||
Uses | Automotive Electrical | Connector Consumer | ||
Physical Nominal Value Test Method | ||||
Density / Specific Gravity 1.54 ASTM D792 1.54 g/cm³ ISO 1183 | ||||
Water Absorption | ||||
24 hrs;23 °C 0.1 % ASTM D570 | ||||
23 °C;saturated 0.09 % ISO 62-1 | ||||
Mold Shrinkage, Flow(3.2 mm) 0.5 - 0.7 % SABIC Method | ||||
Mold Shrinkage, XFlow(3.2 mm) 0.8 - 1 % SABIC Method | ||||
Melt Flow Rate[MFR](250 °C;5 kgf) 52 g/10min ASTM D1238 | ||||
Moisture Absorption(50% RH;23 °C) 0.1 % ISO 62 | ||||
Melt Volume Rate, MVR(5 kg;MVR at 250 °C) 38 cm³/10 min ISO 1133 | ||||
Mechanical | Nominal Value | Test Method | ||
Izod Impact, Unnotched(23 °C) | 770 J/m | ASTM D4812 | ||
Izod Impact, Notched | ||||
23 °C | 82 J/m | ASTM D256 | ||
-30 °C | 83 J/m | ASTM D256 | ||
80*10*4;23 °C | 8 kJ/m² | ISO 180/1A | ||
80*10*4;-30 °C | 8 kJ/m² | ISO 180/1A | ||
Instrumented Dart Impact, Total Energy(23 °C) | 7 J | ASTM D3763 | ||
C harpy Impact, V-Notched(23 °C;Edgew;80*10*4;sp =62 mm 0) | 14 kJ/m² | ISO 179 1eA | ||
Tensile Stress, Yield | ||||
5 mm/min;Type I | 114 MPa | ASTM D638 | ||
5 mm/min | 139 MPa | ISO 527 | ||
Tensile Stress, Break | ||||
5 mm/min;Type I | 114 MPa | ASTM D638 | ||
5 mm/min | 139 MPa | ISO 527 | ||
Tensile Strain, Yield | ||||
5 mm/min;Type I | 2.2 % | ASTM D638 | ||
5 mm/min | 1.6 % | ISO 527 | ||
Tensile Strain, Break | ||||
5 mm/min;Type I | 2.2 % | ASTM D638 | ||
5 mm/min | 1.6 % | ISO 527 | ||
Tensile Modulus | ||||
5 mm/min | 1.2E+04 MPa | ASTM D638 | ||
1 mm/min | 1.1E+04 MPa | ISO 527 | ||
Flexural Stress, Yield | ||||
1.3 mm/min;50 mm;span | 210 MPa | ASTM D790 | ||
2 mm/min | 210 MPa | ISO 178 | ||
Flexural Stress, break(1.3 mm/min;50 mm;span) | 189 MPa | ASTM D790 | ||
Flexural Modulus | ||||
1.3 mm/min;50 mm;span | 9100 MPa | ASTM D790 | ||
2 mm/min | 9100 MPa | ISO 178 | ||
Thermal | Nominal Value | Test Method | ||
Heat Deflection Temperature[HDT], Unannealed 3.2 mm;1.82 MPa 1.82 MPa;6.4 mm | 203 °C 207 °C | ASTM D648 | ||
CTE, Flow | ||||
-40 - 40 °C | 2.5e-05 1/°C | ASTM E831 | ||
-40 - 40 °C | 2.5e-05 1/°C | ISO 11359-2 | ||
CTE, XFlow | ||||
-40 - 40 °C | 8.9e-05 1/°C | ASTM E831 | ||
-40 - 40 °C | 8.9e-05 1/°C | ISO 11359-2 | ||
Ball Pressure Test, Approximate Maximum | 200 °C | IEC 60695-10-2 | ||
HDT/Bf(0.45) | 217 °C | ISO 75/Bf | ||
Electrical | Nominal Value | Test Method | ||
Volume Resistivity | > 1E+15 ohms ·cm | ASTM D257 | ||
Dielectric Strength, in Air(3.2 mm) | 23 kV/mm | ASTM D149 | ||
Processing | Nominal Value | |||
Drying Temperature<Injection> | 120 °C | |||
Drying Time<Injection> | 3 - 4 hrs | |||
Drying Time, Cumulative<Injection> | 12 hrs | |||
Maximum Moisture Content<Injection> | 0.02 % | |||
Melt Temperature<Injection> | 250 - 265 °C | |||
Nozzle Temperature<Injection> | 245 - 265 °C | |||
Front, Zone 3 Temperature<Injection> | 250 - 265 °C | |||
Middle, Zone 2 Temperature<Injection> | 245 - 260 °C | |||
Rear, Zone 1 Temperature<Injection> | 240 - 255 °C | |||
Mold Temperature<Injection> | 65 - 90 °C | |||
Back Pressure<Injection> | 0.3 - 0.7 MPa | |||
Screw Speed <Injection> | 50 - 80 rpm | |||
Shot To Cylinder Size<Injection> | 40 - 80 % | |||
Vent Depth <Injection> | 0.025 - 0.038 mm |