Complaint
Super Tough PLA
PLA-ST has better toughness, higher impact strength, higher elongation at break, better bending resistance, not easy to break, good printability. Suitable for printing mechanical parts with higher requirements for impact resistance and precision.
Stable Dimensional Tolerance
Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, easy handling, resulting in an outstanding surface finish and are highly precise.
Tangle Free & No Plugging
Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder, high successful printing rate.
High Compatibility
Compatible with Most of FDM 3D Printers on Market. Widely used in mechanical models, structural parts and functional parts, such as industrial design, consumer electronics, auto parts, IT manufacturing, mechanical and electrical fields.
Vacuumed Sealed Packaging
Filament Net Weight: 1KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
| 3D PRINTING FILAMENT | PLA-ST |
|---|---|
| Density(g/cm3) | 1.25 |
| Heat Distortion Temp(ºC,0.45MPa) | 52 |
| Melt Flow Index(g/10min) | 3.2(190ºC/2.16kg) |
| Tensile Strength(MPa) | 34.3 |
| Elongation at Break(%) | 90 |
| Flexural Strength(MPa) | 43 |
| Flexural Modulus(MPa) | 1477 |
| IZOD Impact Strength(kJ/) | 63 |
| Durability | 4/10 |
| Printability | 9/10 |
| Recommended printing parameters | |
| Extruder Temperature(ºC) | 200 - 230ºC Recommended temperature:215ºC |
| Bed temperature(ºC) | 45 - 60°C |
| Fan Speed | 100% |
| Printing Speed | 40 - 100mm/s |
| Heated Bed | Optional |
| Recommended Build Surfaces | Masking paper, PVP solid glue, PEI |
