Complaint
| MODEL:HX(*)318PET | |||
| TECHNICAL PARAMETER TABLE | |||
| INJECTION UNIT | SCREW DIAMETER | mm | 75 |
| SCREW L/D RATIO | L/D | 24 | |
| INJECTION CAPACITY (THEORETICAL) | cm3 | 1502 | |
| INJECTION WEIGHT(PET) | g | 1742 | |
| oz | 56.3 | ||
| INJECTION PRESSURE | MPa | 149 | |
| INJECTION RATE | g/s | 520 | |
| PLASTICIZING CAPACITY | g/s | 85 | |
| SCREW SPEED | rpm | 120 | |
| CLAMPING UNIT | CLAMP FORCE | KN | 3180 |
| OPEN STROKE | mm | 600 | |
| MAX. MOULD HEIGHT | mm | 690 | |
| MIN. MOULD HEIGHT | mm | 230 | |
| SPACE BETWEEN TIE-BARS (W×H) | mm | 660*590 | |
| EJECTOR STROKE | mm | 134 | |
| EJECTOR FORCE | KN | 175 | |
| EJECTOR NUMBER | n | 13 | |
| OTHERS | PUMP PRESSURE | MPa | 17.5 |
| MOTOR POWER | KW | 38 | |
| HEATING POWER | KW | 24.73 | |
| MACHINE DIMENSION (L×W×H) | m | 7.35*1.42*2.20 | |
| MACHINE WEIGHT | t | 9 | |
| OIL TANK | L | 415 | |
