Complaint
| Type of light | red light |
|---|---|
| Laser protection class | 2 |
| Housing | rectangular |
| System | Background suppression |
|---|
| Operating voltage [V] | 10...30 DC; (cULus - Class 2 source required) |
|---|---|
| Current consumption [mA] | 75; (24 V) |
| Protection class | III |
| Reverse polarity protection | yes |
| Type of light | red light |
| Wave length [nm] | 650 |
| Typ. lifetime [h] | 50000 |
| Number of inputs and outputs | Number of digital outputs: 2 |
|---|
| Total number of outputs | 2 |
|---|---|
| Electrical design | PNP |
| Number of digital outputs | 2 |
| Output function | normally open / closed; (complementary) |
| Max. current load per output [mA] | 100 |
| Switching frequency DC [Hz] | 11 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Max. light spot diameter [mm] | 5 | |
|---|---|---|
| Light spot dimensions refer to | 2 m | |
| Detection range hysteresis [%] | < 2.5 | |
| Note on monitoring range hysteresis |
| |
| Background suppression available | yes | |
| Background suppression [m] | < 20 |
| Measuring range [m] | 0.03...2 |
|---|---|
| Sampling rate [Hz] | 33 |
| Communication interface | IO-Link | ||||
|---|---|---|---|---|---|
| Transmission type | COM2 (38,4 kBaud) | ||||
| IO-Link revision | 1.1 | ||||
| SDCI standard | IEC 61131-9 | ||||
| Profiles | Smart Sensor: Sensor Identification; Binary Data Channel; Process Value; Sensor Diagnosis | ||||
| SIO mode | yes | ||||
| Process data analog | 1 | ||||
| Process data binary | 1 | ||||
| Min. process cycle time [ms] | 6.6 | ||||
| Supported DeviceIDs |
|
| Ambient temperature [°C] | -25...60 | |
|---|---|---|
| Note on ambient temperature |
| |
| Protection | IP 65; IP 67 | |
| Max. immunity to extraneous light [klx] | 10; (on the object) | |
