1. Working Medium: Air, Water, Oil, Fluid, Gas, etc
2. Working Pressure Range: 0 to 16 bar (See the parameter table below for details)
3. Medium Temperature Range: NBR (-10 to +80ºC), EPDM (-30 to +120ºC), VITON (-30 to +150ºC)
4. Port Size: 1/8'', 1/4''
5. Orifice Size: 1.5mm, 2.0mm, 2.5mm
6. Body Material: Brass
7. Seal Material: NBR, EPDM, VITON
8. Operation: Direct Acting
9. Function: 3 Way Normally Closed, 3 Way Normally Open
10. Voltage: 12VDC, 24VDC, 24VAC, 110VAC, 220VAC
Model | Port Size (inch) | Orifice Size (mm) | Kv (m³ /h) | Pressure Range (bar) | Medium Temperature (ºC) | Body Material | Voltage |
3 Way Normally Closed (6014 C), 3 Way Normally Open (6014 D) | |||||||
6014 | 1/8'' | 1.5 | 0.07 | 0 to 16 | NBR: -10 to +80 EPDM: -30 to +120 VITON: -30 to +150 | Brass Stainless Steel | 12VDC 24VDC 24VAC 110VAC 220VAC |
2 | 0.11 | 0 to 10 | |||||
2.5 | 0.16 | 0 to 6 | |||||
1/4'' | 1.5 | 0.07 | 0 to 16 | ||||
2 | 0.11 | 0 to 10 | |||||
2.5 | 0.16 | 0 to 6 | |||||
Sub-base (SFB) | 1.5 | 0.07 | 0 to 16 | ||||
2 | 0.11 | 0 to 10 |
Question 1: What is a solenoid valve used for?
Answer 1: A solenoid valve is used to open, close, mix, or divert media in an application. They are used in a wide variety of applications.
Question 2: How can you tell if your solenoid is bad?
Answer 2: If the solenoid valve fails to open or close, is partially open, makes a humming noise or has a burned-out coil, you need to troubleshoot the valve solenoids.
Question 3: How do I choose a solenoid valve?
Answer 3: When choosing a solenoid valve, it is important to know your media. Depending upon the media and flow requirement, choose the material, orifice size, temperature, pressure, voltage, response time and certification required for your application.