Complaint
The TRAXIFLEX® hanger comprises two metallic U armatures joined by two bonded rubber blocks.
It is available in two versions : male/female and female/female.
OPERATION
The design of the TRAXIFLEX® hanger gives the following basic characteristics :
· rubber works in compression-shear;
· the same deflection under nominal load for all types;
· safety system in case of elastomer failure.
Advantages
· Economic solution for suppressing structure borne noise.
· Several fixing methods.
· High resistance to atmospheric exposure :
- galvanised armatures;
- chloroprene elastomer.
· Upper metallic part is shaped to simplify orientation while fixing.
· Two hardnesses of elastomer to extend the choice of mounting as a function of load.
· Filtration of vibration and the attenuation of the consequent noise.
· Allows movement due to thermal expansion.
| Recommended load (daN) | Deflection (mm) | Reference | Hardness 1 screw - 1 nut 2 nuts Shore A | |
| 1 screw - 1 nut | 2 nuts | |||
| 4-18 | 4 | 535600 | - | 45 |
| 4-18 | 4 | 535603 | - | 45 |
| 7-30 | 4 | 535600 | - | 60 |
| 7-30 | 4 | 535603/61* | - | 60 |
| 7-30 | 4 | - | 535623/61 | 60 |
| 10-52 | 4 | 535611 | 535621 | 45 |
| 20-80 | 4 | 535611 | 535621 | 60 |
| 20-80 | 4 | 535611* | 535621 | 60 |
| 20-92 | 4 | 535612 | 535622 | 45 |
| 30-136 | 4 | 535612 | 535622 | 60 |
Office Factory Show Room
