High CRI LED Shapeable Track Spot Light with UV Color ND CPL Fliter for Art Auction Venue Art Auction Special Themed Exhibit Artist Studio Art Gallery

High Cri LED Shapeable Track Spot Light With UV Color ND CPL Fliter for Art auction venue Art auction Special themed exhibit Artist studio art gallery

1.Cold forging integrated radiator design
A radiator made of 1070#pure aluminum and molded by molding pressure. It has high thermal conductivity, low-temperature differences, low light failure, and long service life. Thermal conductivity 226W/m.K

2.360° manual rotation design
Loosen the manual screw and turn the lens to achieve the 360°spot rotation adjustment function. Device to solve the 360° rotation of the projection and light spot.

3.High-definition optical lens design
It is formed by a plurality of high-definition coated optical lenses. The whole lamp has the characteristics of high luminous efficiency, high spot uniformity, minor distortion, extensive linear zoom range, good spot cut-off line, etc.. A new optical path specially designed for COB light sources.

4.Optical-grade variable aperture design
An optical diaphragm made of high-precision special material with no blurring and freezing. Manual insertion and removal of the light cutting device can freely change the shape of the spot.

5.Multi-layer dry damping design
The invention is a focusing device not requiring the application of lubricating oil and has a silky feel. It is stable, reliable, wear-resistant, resistant to high temperatures, and does not wear off after extended use. Rotating the device can change the sharpness of the spot.

6.Multi-layer dry damping design
Short stroke, considerable focal length, high short-focus and long-focus recognition, visible to the naked eye, linear zoom is enhanced and more convenient. Rotate the device to adjust the spot size.

A mini shapeable track light with a maximum diameter of only 36mm, the maximum angle of up to 45 D0870L D0840L 01 05a 03a M03 degrees. Suitable for any commercial lighting. Support embedded installation, magnetic installation, and track installation. Photoelectric performance is the same to the DQ series.
 

I. First loosen and pull out thehand screw (red part) shown inFIG. 1, and then pull out themain part of the lens (bluearea) and separate it from thelamp body: Figure 2 shows thepart of the optical lens afterseparation, and Figure 3shows the part of the lampbody after separation.
Il. Stretch the four diaphragmsheets on the optical lens ofFigure 4 outward to themaximum extent as showm inFigure 5.
IIl Uns crew the blue part ofthe optical components at thebottom of the lens in Figure 6and separate it as shown inFigures 7 and 8.Then separatethe lens face ring in FIG. 8 asshown in FIG.9.
IV. Find the gobo devicedelivered by the manufacturer(the red part in Figure 10),install the gobo device asshown in Figure 10, and thenreinstall the optical lens asshown in Figure 11, and thenreinstall the lens as shown inFigure 6, and then reinstall thelamp body as shown in Figure1. The LOGO lamp assembly iscomplete.
V.You can design and make avariety of image gobo. Thespecifications are shown inFigure 12.
Daily maintenance:
I .When the edge of the circularspot becomes rough or granular(Figure 13) please open the lensand wipe the red part in Fiqure 7with a dust-free cloth or eyeglasscloth.
Il .When the edge of the squarespot becomes rough or granular(Figure 14) please open the lensand wipe the green edge inFiqure 7 with a dust-free cloth oreyeglass cloth.
IIl.When small shadows or particlesappear in the middle or edge of anyspot (Figure 15, 16), open the lensand wipe the optical lens in Fiqure 8with a dust-free cloth or eyeglassdoth