Complaint
| Subject | Symbol | Description |
| Sealing & Sealing type | Z | Metal shield on one side. |
| ZZ | Metal shields on both sides. | |
| RS | Rubber seal on one side. | |
| 2RS | Rubber seals on both sides. | |
| ZNR | Shield on one side, snap ring groove in the outer ring, with snap ring on the opposite side of the shield | |
| 2ZNR | Shield on both sides, snap ring groove in the outer ring, with snap ring | |
| ZNBR | Shield on one side, snap ring groove in the outer ring, with snap ring on the same side as the shield | |
| Vibration Velocity | V | Normal vibration level. Is not indicated as a standard. |
| V1 | Lower vibration level than normal. | |
| V2 | Lower vibration level than V1. | |
| V3 | Lower vibration level than V2. | |
| V4 | Lower vibration level than V3. | |
| Tolerances | P0(ABEC1) | Bearings in standard tolerance |
| P6(ABEC3) | Tighter tolerance than standard bearings | |
| P5(ABEC5) | Tolerance tighter than P6 | |
| P4(ABEC7) | Tolerance tighter than P5 | |
| P2(ABEC9) | Tolerance tighter than P4 | |
| Radial internal clearance | C1 | Smaller clearance than C2 |
| C2 | Smaller clearance than CN | |
| CN(C0) | Clearance than normal | |
| C3 | Clearance larger than CN | |
| C4 | Clearance larger than C3 | |
| C5 | Clearance larger than C4 | |
| Snap Ring Groove | N | Snap ring groove in the outer ring |
| NR | Snap ring groove in the outer ring, with snap ring | |
| N1 | One locating slot in one outer ring side face | |
| R | Flanged outer ring | |
| Other technical modifications | NR | Groove with inserted snap ring in outer ring. |
| N | Snap ring groove in the outer ring. | |
| SS | Stainless steel. |
| Cage Materials | J | Pressed steel cages |
| M | Solid brass cage | |
| F | Solid cage made from steel or iron | |
| Y | Pressed brass cages. | |
| T | Laminated phenolic cages. | |
| TN | Polyamide cages | |
| TH | Glass-fiber reinforced phenolic resin cages. | |
| TV | Polyamide cage | |
| Cage Designs | P | Window-type cage |
| H | Claw-type cage | |
| A | Cage guided on the bearing outer ring | |
| B | Cage-guided on the bearing inner ring | |
| S | Cage with lubricating slots in the guiding surfaces | |
| D | Carbonitriding cage | |
| W | Welded cage | |
| R | Riveted Cage | |
| Cage Types | N/A | Claw-type cage |
| Ribbon cage | ||
| Crown cage | ||
| Sunflower cage | ||
| Tapered cage |
| 1Designation | Boundary Dimension (mm) | Limiting Speed (rpm) | Load Rating (Kn) | Weight | ||||
| Designation | Inner Diameter (d) | Outside Diameter (D) | Width (B) | Grease Lubrication | Oil Lubrication | Dynamic Load (cr) | Static Load (cor) | Weight (kg) |
| 6001 | 12 | 28 | 8 | 20000 | 26000 | 5.1 | 2.38 | 0.022 |
| 6002 | 15 | 32 | 9 | 19000 | 24000 | 5.58 | 2.85 | 0.03 |
| 6003 | 17 | 35 | 10 | 17000 | 21000 | 6.0 | 3.25 | 0.04 |
| 6004 | 20 | 42 | 12 | 16000 | 19000 | 9.38 | 5.02 | 0.069 |
| 6005 | 25 | 47 | 12 | 15000 | 18000 | 10.1 | 5.85 | 0.08 |
| 6006 | 30 | 55 | 13 | 13000 | 15000 | 13.2 | 8.25 | 0.116 |
| 6007 | 35 | 62 | 14 | 11000 | 13000 | 15.9 | 10.3 | 1.155 |
| 6008 | 40 | 68 | 15 | 9000 | 11000 | 17 | 11.8 | 0.185 |
| 6009 | 45 | 75 | 16 | 8000 | 10000 | 21 | 14.8 | 0.23 |
| 6010 | 50 | 80 | 16 | 7000 | 9000 | 22 | 16.2 | 0.25 |
| 6011 | 55 | 90 | 18 | 7000 | 8500 | 30.2 | 21.8 | 0.362 |
| 6012 | 60 | 95 | 18 | 6300 | 7500 | 31.5 | 24.2 | 0.385 |
| 6013 | 65 | 100 | 18 | 6000 | 7000 | 32 | 24.8 | 0.41 |
| 6014 | 70 | 110 | 20 | 6000 | 7000 | 38 | 31 | 0.62 |
| 6015 | 75 | 115 | 20 | 5600 | 6700 | 38 | 31 | 0.63 |
| 6016 | 80 | 125 | 22 | 5300 | 6300 | 47.5 | 40 | 0.86 |
| 6017 | 85 | 130 | 22 | 5000 | 6000 | 47.5 | 40 | 0.94 |
| 6018 | 90 | 140 | 24 | 3700 | 4600 | 63.8 | 59 | 1.38 |
| 6019 | 95 | 145 | 24 | 3300 | 4250 | 66.7 | 62.3 | 1.5 |
| 6020 | 100 | 150 | 24 | 3150 | 4000 | 72.5 | 70 | 1.63 |
| 6022 | 110 | 170 | 28 | 3000 | 3900 | 80 | 78.9 | 2.35 |
| 6024 | 120 | 180 | 28 | 2800 | 3560 | 81 | 81 | 2.62 |
| 6026 | 130 | 200 | 33 | 2600 | 3400 | 96.8 | 100 | 4.55 |
| 6028 | 140 | 210 | 33 | 2300 | 3250 | 123.7 | 125 | 4.21 |
| 6030 | 150 | 225 | 35 | 2200 | 3000 | 132 | 130 | 3.9 |
| 6032 | 160 | 240 | 38 | 2000 | 2800 | 145 | 138 | 5.89 |
| 6034 | 170 | 260 | 42 | 1900 | 2600 | 170 | 170 | 6.5 |
| 6036 | 180 | 280 | 46 | 1800 | 2400 | 188 | 198 | 8.51 |
| 6038 | 190 | 290 | 46 | 1700 | 2200 | 188 | 200 | 8.865 |
| 6040 | 200 | 310 | 51 | 1600 | 2000 | 205 | 225 | 11.64 |
| 6044 | 220 | 340 | 56 | 1400 | 1800 | 252 | 268 | 18 |
| 6048 | 240 | 360 | 56 | 1200 | 1600 | 270 | 292 | 20 |
| 6052 | 260 | 400 | 65 | 1100 | 1500 | 292 | 372 | 28.8 |
40+ YEARS EXPERIENCE
GOOD ENOUGH QUALITY, MUCH LESS MONEY COST!
With over 40 years experience of the bearing manufacturing, we know how to make good bearings with less cost consistently and efficiently.
PACKING METHODS
1, Inner package
Corrosion and Dust Proof PE plastic film / bag packing + Tube packing, or Wrapping tape for larger bearings
2, Outer package
Corrugated carton + Wooden pallet
1, About the lead time.
This depends on several factors, like Is the production schedule tight? Is there a corresponding model in stock, and is there enough of this model in stock? How many pcs of that model would be ordered?
Simply speaking, based on a 20' GP container load
| If the model your Preferred is | Sufficient stock | Lead Time |
| Regular models | YES | Within 7 days |
| Regular models | NO | Within 30 days |
| Non-regular model | NO | About 50 days |
For accurate estimate, please contact with our sale stuff. Thanks.
2, Minimum order quantity.
Our target customer is a regional or national distributor, or brand owner, with a significant volume of moving sales. Therefore, our minimum order quantity is one pallet, regardless of whether the order is for one model or several.
However, you can try asking our salesmen if we accept orders smaller than one pallet.
3, If you don't know which model is the right choice...
We would like to give you some advise if you like, according to the real situation and demand of your local market. Our purpose is to help you to get proper and right models for your customers, so that you would make a better sales and income finally.
