Wholesale Agriculture auto steering system in Tractor AF305
Ideal solution for precision agriculture
UNIQUENAV AF305 Auto-Steering System is an automatic steering system that uses high-torque motor control steering wheel. It integrates the advantages of convenient installation, large torque, high precision, low noise, low heat, and quick debugging. It is suitable for various applications of tractors, harvesting machines, plant protection machinery, rice transplanters, and other agriculture models.
The system consists of a base station and a vehicle control part. The vehicle control part includes a control tablet integrated with a high-precision GNSS board, a steering wheel motor with a built-in controller, and an angle sensor, It can be widely used for sowing, cultivating, trenching, ridging, spraying pesticide, transplanting, land consolidation, harvesting and other work scenarios.
AF305 | Multiple constellations & frequencies | GPS L1/L2 |
GLONASS L1/L2 | ||
Beidou B1/B2 | ||
Galileo E1/E5b | ||
QZSS L1/L2 | ||
SBAS L1 | ||
Small high-torque motor | ||
Highly integrated system | ||
Non-contact angle sensor | ||
10.1" touch screen control tablet | ||
High accuracy to ±2.5cm | ||
Without modification of the hydraulic system | ||
Dual antennas receive signals | ||
Fast installation in 30 minutes | ||
Calibration in 15 minutes | ||
T100 Control Tablet | System | |
Operating System | Android 6.0 | |
CPU | Quad-Core 1.5GHz | |
Memory | 2GB RAM+16GM ROM | |
External Flash | T-Flash, up to 64GB | |
LCD | 10.1" Capactive Touch Screen | |
Resolution | 1024*600 pixels | |
Communication | ||
Wi-Fi | 2.4GHz IEEE 802.11 b/g/n | |
Cellular | FDD-LTE 800/1800/2100/2600MHz TD-LTE 1900/2300/2500/2600MHz WCDMA 850/900/1900/2100MHz GSM 850/900/1800/1900 MHz | |
Bluetooth | V4.0 | |
USB | USB 2.0(host& debug) *1 | |
Audio | 3.5mm Audio Jack for Audio | |
Serial Port | RS232*2, RS485*1 | |
CAN Port | CAN*2 (J1939, CANOpen, ISO15765) | |
Ethernet | RJ45 (100M Ethernet) *1 | |
GNSS | ||
Signal Tracking | GPS L1,L2; GLONASS L1,L2; BeiDou B1,B2; GALILEO L1, L2; QZSS L1,L2; SBAS L1 | |
GNSS Channels | 432 | |
Single Point Positioning Accuracy (RMS) | Horizontal: 10mm+1ppm Vertical: 15mm+1ppm | |
Heading Accuracy | 1m Baseline(RMS) : 0.1° | |
Timing Accuracy (RMS) | 20ns | |
Velocity Accuracy (RMS) | 0.03m/s | |
Correction | RTCM 2.3/3.0/3.2 | |
Heading and RTK update rate | 20Hz | |
Network Protocol | NTRIP, TCP/IP | |
Electrical | ||
Power Input | 9V~36V DC | |
Power failure detection | supported | |
Power output | 12V DC*2 | |
Physical | ||
Dustproof & Waterproof | IP-65 | |
Dimension | 281mm*181mm*42mm | |
Weight | 1.5kg | |
Operating Temperature | -20ºC~+70ºC | |
Storage Temperature | -40ºC~+85ºC | |
EMS2 Motor Wheel | Rated speed | 100rpm |
Rated torque | 10 N-m | |
Guaranteed continuous operation speed | 100rpm | |
Maximum freewheel error | 0 (without reducer) | |
Supply voltage | 8V~16V DC | |
Rated current | 10A | |
Stall current | 25A | |
Rated voltage | 12V | |
Communication | ||
Communication protocol | ModBUS | |
Encoder resolution | 1000 lines, 4000 pulses/ circle | |
Encoder interface (protocol) | parallel, no protocol | |
Encoder maximum output rate | 200KHz | |
Communication interface | RS232 | |
Physical | ||
Dimension | 187*100.2mm (motor) 410*32mm (steering wheel) | |
Weight | 6.35kg (motor only) | |
Material | Aluminum alloy | |
Envoronmental | ||
Operating Temperature | -40ºC~+105ºC (motor) | |
Storage Temperature | -45ºC~+150ºC (motor) | |
R70 Smart Antenna | Frequencies | GPS L1,L2;GLONASS L1,L2; BeiDou B1,B2,B3; Galileo E1/E5a/E5b; QZSS L1/L2/L5 |
Polarization | RHCP | |
Axial Ratio | ≤3dB | |
Azimuth Coverage | 360° | |
Output VSWR | ≤2.0 | |
Peak Gain | 5.5dBi | |
Phase Center Offsets | ±2mm | |
Environmental | ||
Operating Temperature | -30ºC~+75ºC | |
Storage Temperature | -40ºC~+85ºC | |
Humidity | 95% not condensing | |
LNA | ||
LNA Gain | 40±2dB | |
Noise Figure | ≤2.0dB | |
Output VSWR | ≤2.0 | |
Operation Voltage | 3.3V~12V DC | |
Operation Current | ≤45mA | |
Ripple | ±2dB | |
Mechanical | ||
Physical Dimension | 179*179*69mm | |
Connector | TNC Female | |
Screw Hole for assembly | 5/8" *11 UNC Female | |
Weight | 1.1kg | |
Channel | 432 channel, based on Nebulasll chip |
1.What are your prices?
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information.
2.Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website
3.Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
4.What is the average lead time?
For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.
5.What kinds of payment methods do you accept?
You can make the payment to our bank account, T/T, credit card, Western Union.
6.What is the product warranty?
We warranty our materials and workmanship. Our commitment is to your satisfaction with our products. In warranty or not, it is the culture of our company to address and resolve all customer issues to everyone's satisfaction
7.Do you guarantee safe and secure delivery of products?
Yes, we always use high quality export packaging. We also use specialized hazard packing for dangerous goods and validated cold storage shippers for temperature sensitive items. Specialist packaging and non-standard packing requirements may incur an additional charge.
8.How about the shipping fees?
We usually use delivery express, such as DHL, FedEx, UPS, etc.