Hengtong 4-20mA High Temperature Resistance Flush Pressure Transmitter

Min.Order: 1
Product origin: Baoji, Shaanxi, China
Infringement complaint: complaintComplaint
US$ 48 ~ 65

Description

high temperature Flush Diaphragm pressure sensor transducer
BP93420-IQ Pressure Transmitter


Introduction: 
BP93420-IQT 1.5mm clamp to install large diaphragm high temperature transmitter The signal processing circuit is located inside a stainless steel housing, converting the sensor signal into a standard output signal. This pressure transmitter is primarily used in places where high sanitary conditions are required, ensuring reliable and accurate pressure measurements in hygienic environments.
Product  Features:
  1. Various pressure interface options
  2. Designed for hygienic applications to prevent medium scaling
  3. High accuracy with a fully stainless steel structure
  4. Easy to clean.
Applications:
  1. Suitable for measuring non-corrosive gases and liquids with 316L
  2. Ideal for environmental protection and chemical industries
  3. Used in the marine and aviation industries
  4. Well-suited for use in the medical, biopharmaceutical, and food hygiene industries.  
Performance Parameters
Measurement Range0~35Kpa…~3.5MPa
Pressure TypeGauge Pressure, Absolute Pressure, Sealed Pressure
Overload≤ 1.5 times of the rated range
Accuracy @ 25ºC±0.25% (Typical) ±0.5% (Maximum)
Repeatability0.1%FS
Hysteresis0.1%FS
Long-Term Stability±0.1%F.S/Year(Typical) ±0.2%F.S/Year(Maximum)
Zero Point Temperature Drift±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa)
Full Scale Temperature Drift±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa)
Frequency Response2.4Khz
Compensation Temperature-20-70ºC(≤10mpa,customizable)
Operating Temperature-20ºC~80ºC
Storage Temperature-40ºC~120ºC
Vibration10g,55Hz ~ 2kHz
Housing Material304,316L
Diaphragm Material316L
Insulation Resistance100MΩ 100VDC
Explosion-proof RatingEx db IIC T6 Gb
Protection RatingIP65
O-Ring SealFluoro rubber
Weight~0.55kg
  1.  
Output SignalSupply VoltageOutput Type
4~20mA12~30VDC2/3/4 wire
0~10/20mA
3 wire
0/1~5V 
0/1~10V
0.5~4.5V5VDC
RS485 Communication Protocol3.6~30V / Battery4 wire
 


 
Order Guide
BP93420XXPressure Transmitter
 CodeOutline Construction
IBGeneral Pressure TransmitterIXDisplay Pressure Transmitter
IEShock-resistant Aviation Pressure TransmitterIIC/IIIIndustrial General/ Display Pressure Transmitter
IFMoisture-proof Pressure TransmitterIIE/IIIEGeneral/Display Pressure Transmitter
INAir Conditioning Dedicated Pressure TransmitterICHigh-temperature Pressure Transmitter
IQ/IQTLarge Diaphragm /High-temperature Pressure Transmitter  
 Measurement Range-100kPa…0kPa ~ 35kPa…3.5MPa
(0-X)Kpa or MPaX: Indicates the Actual Measuring Range
 CodePower Supply
D124VDC
D25VDC
D3Other
 CodeOutput Signal
S14~20mADCS50~20mADC
S21~5VDCS60~10VDC
S30~5VDCS70.5~4.5VDC
S40~10mADC  
  CodeElectrical Connection
B1Hirschmann
B2PG7 Plug
B3Sealed Cable Output
B42088 Industrial Casing
B52088 Industrial Casing with Display
B6Other
 CodePressure Type
GGauge Pressure
AAbsolute Pressure
SSealed Reference Pressure
Ordering tips
1. When selecting the product, please ensure that the medium to be measured is compatible with the contact parts of the product.
2. When placing an order, please note that explosion-proof type products do not include digital display heads.
3. When ordering transmitters with an LCD or LED display head, the power supply for the transmitter should not be lower than 20VDC.
4. To ensure reliable operation of the product, it is recommended that users install lightning protection devices on-site and ensure that the product and power supply are  reliably grounded.
5. The rated working temperature range of the Fluoro rubber O-ring is -20ºC to 250ºC. When the product's operating temperature is below -20ºC, it is necessary to choose an EPDM O-ring seal.
6. The default cable length is 1.5m, available in three materials. If not specified, it will be supplied with polyethylene cable material. If you require a different cable material, please specify it in the order.
7. For special requirements such as strong vibration, instantaneous impact force, strong electromagnetic or radio frequency interference, please inform our company and specify them in the order.

 




 
Q&A
1. Q: What are the features of your pressure sensor transmitters?
     A: High precision, durability, and excellent performance. Customization available.
2. Q: Can I customize special specifications?
     A: Yes, our engineers can tailor products to meet specific needs. We provide OEM and ODM service
3. Q: What is your production capacity?
     A: Our manufacturing facilities can produce up to 30,000 pressure sensor transmitters per month, so we are fully capable of meeting the needs of large-scale orders. However, it is advisable to contact our sales team in advance to ensure smooth production and delivery scheduling.
4. Q: What's the typical delivery period?
     A: 5~8 working day for standard models. Customized products may vary.
5. Q: How are the products priced? Any discounts?
     A: Competitive pricing with discounts for bulk orders or long-term partners.
6. Q: What is the warranty of your products? And after-sales service?
     A: Our warranty time is 24 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.



 


Product Tag:
Related categories:
Scroll to Top