Honle Ybp (M) -12/40.5 Environmentally Friendly Prefabricated Substation

Min.Order: 1

Product origin: Wenzhou, Zhejiang, China

Infringement complaint:

Complaint

US$ 8000

Description

Honle YBP(M)-12/40.5 Environmentally Friendly Prefabricated Substation

Product overview

YBP(M)-12 prefabricated substation is a complete intelligent power supply and distribution device optimized with new environmentally friendly materials, new technology, advanced high and low voltage technology, it has multi-function and wild usage with reliable operation and good appearance. It can combine with the surrounding environment to design a variety of different styles and shapes. It has featutes of easy installation, less land requirement, less maintenance, less investment and long life. It can be used as power distribution equipment for urban buildings, residential areas, municipal facilities, mines, roads, gardens, piers, oil fields and trmporaty power supply and other departments.

Service condition

• Altitude: not exceed 1000m;
• Ambient temperature: -25+40; average temperature within 24h should not exceed-30
• Quakeproof level:horizontal acceleration not exceed 0.4m/s2, vertical acceleration not exceed 0.2m/s2; No severe vibration, shock or explosive danger in the installation site.

Structure

• According to whether it can be equipped with intelligent system, it can be divided into: Intelligent type; compact type.
• The cabinet body (shell) materials:metal shell; nonmetallic shell.
• Non-metallic shell is precast synthesized by non-metallic fiberglass and special reinforced concrete, it has high mechanical strength and good impact resistance,it has low thermal conductivity, and it has fireproof and smoldering features,compared with metal shll,it has better corrosion resistance and extremely long life and other characteristics.

Matters need attention for hoisting transportation,operation and installation of cubicle substation:

• Surrounding of the foundation of cubicle substation shall be embedded with grounding electrodse, transformer and lightning protector can share the grounding system, grounding resistance shall be <4 Ohm
• Use special hoisting tool for lifting the cubicle substation,must use the marked parts on substation for hoisting.
• Junction part of the substation bottom and foundation should be sealed with cement to prevent sater from entering into the cable chamber.
• After the cable is set in the cuale sleeve, its gap must be sealed to prevent from pests or water.

Model

Basic Technical Parameters

Rated voltage		Auxiliary circuit			Rated capacity of transformer	Rated current
HV side	LV side	DC			(kVA)	HV	LV
12kV 40.5kV	0.4kV	110V 220V 380V	24V		100,125,160,200,250,315,400,500, 630,800,1000,1250,1600	400A 630A	100A~2500A

Rated frequency		Rated short-time withstand current				Rated peak withstand current
		HV switchgeat		LV switchgeat
50Hz 60Hz		12/40.5kV 16kA-2s(4s) 20kA-2s(4s)		250-315kVA 15kA 400-800kVA 30kA 1000kVA above should beconducted according to actual short-citcuit current Note:up to and including 200kVA can be excused from tedt		12kV 40kV 50kA

Insulation level, withstand voltage of high-voltage equipment

Rated voltage	Lightning impulse withstand voltage		1minpower frequency withstand voltage
	To-ground and phase-to-phase	lsolating distance	To-ground and phase-to-phase	lsolating distance
12/40.5	75/185	85/215	42/95	85/118

Schematic diagram and structural style of cabinet body of commonly used cubiclesubstation

"B" shaped and "triangle" shaped structure
(H-HV chamber,T-transformerchamber,L-LV chamber)

About Company

FAQ
Q 1.Where is your market?
A. Our products are popular in North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western European so on. Some of them are our regular customers and some of them are developing. We hope you can join us and make mutual benefit from our cooperation.

Q 2. Can your factory produce according to customers' requirements?
A. Yes, we can produce different products according to customers' requirements.

Q 3. What's the payment terms?
A. We accept LC, T/T, D/P, Western Union PayPal. If others, we can discuss.

Q 4. How's the delivery time?
A. Usually it will take about 30 days after order confirmed.

Q 5.Could you offer Form A or CIO?
A. No problem. We can prepare relative documents to origin affairs office or other office to apply for related certificates.

Q 6.Would you accept to use our logo ?
A. If good quantity, it absolute no problem to do OEM.

Q 7: Are you a manufacturer or trading company?
A: We are a manufacturer with many years of manufacturering experience.

Q 8:What kind of certificates you have?
A:Our company already achieve ISO9001, and for products, we have CE,ISO9001,ISO14001 and so on.

Q 9: How long have you been worked in the electric industry?
A: We have been worked in the electric industry for more than 20 years. We have own research and development department that has 15 engineering technicians.

Q 10: What is the standard of package?
A: Export standard package or special package according to customer's requirement.

Q 11: How long have you been worked in the electric industry?
A: We have been worked in the electric industry for more than 20 years. We have own research and development department that has 15 engineering technicians.

Forward

Related products