Ti Bq24272 Battery Power Charger Control Management Integrated Circuit IC Voltage Monitor Protector Electronic Components Chip

• High-Efficiency Switch Mode Charger with Separate Power Path Control
  • Instantly Startup System from a Deeply Discharged Battery or No Battery
• 20V input rating, with 10.5V Over-Voltage Protection (OVP)
• Integrated FETs for Up to 2.5A Charge Rate
• Highly Integrated Battery N-Channel MOSFET Controller for Power Path Management
• Safe and Accurate Battery Management Functions
  • 0.5% Battery Regulation Accuracy
  • 10% Charge Current Accuracy
• Voltage-based, NTC Monitoring Input (TS)
  • JEITA Compatible
• Thermal Regulation Protection for Output Current Control
• BAT Short-Circuit Protection
• Soft-Start Feature to Reduce Inrush Current
• Thermal Shutdown and Protection
• Available in Small 49-ball WCSP or QFN-24 Packages

The bq24272 is a highly integrated single cell Li-Ion battery charger and system power path management device targeted for space-limited, portable applications with high capacity batteries. The single cell charger operates from a dedicated power source such as a wall adapter or wireless power supply for a versatile solution.

The power path management feature allows the bq24272 to power the system from a high efficiency DC to DC converter while simultaneously and independently charging the battery. The charger monitors the battery current at all times and reduces the charge current when the system load requires current above the input current limit. This allows for proper charge termination and timer operation. The system voltage is regulated to the battery voltage but will not drop below 3.5V. This minimum system voltage support enables the system to run with a defective or absent battery pack and enables instant system turn-on even with a totally discharged battery or no battery. The power-path management architecture also permits the battery to supplement the system current requirements when the adapter cannot deliver the peak system currents. This enables the use of a smaller adapter.

The battery is charged in three phases: conditioning, constant current and constant voltage. In all charge phases, an internal control loop monitors the IC junction temperature and reduces the charge current if the internal temperature threshold is exceeded. Additionally, the bq24272 offers a voltage-based battery pack thermistor monitoring input (TS) that monitors battery temperature for safe charging.