Complaint
| System power supply | 22-28VDC(Nominal 24VDC) |
| Protection | Anti-reverse connection protection |
| Module consumption | 70mA@24Vdc |
| Internal Bus supply current | Max:2.0A@5VDC |
| Isolation | system to site power isolation |
| Field power supply | 22-28V(Nominal 24V) |
| Field supply current | Max. DC 8A |
| Number of supported I/O modules | 32 pcs |
| Wiring diameter | Max.1.5mm² (AWG 16) |
| Way to install | 35mm DIN rail |
| Dimension | 115 * 65.5 * 75mm |
| Weight | 120g |
Programming Specification
| Programming Specification | |
| Programming Software | CODESYS SP17 |
| Programming language | IEC 61131-3 (LD, IL, ST, CFC/FBD, SFC) |
| Maximum State Tasks | 5 |
| Bit Instruction Cycle | 0.21us |
| Word Transfer Cycle | 0.39us |
| Floating Point Operation Cycle | 0.42us |
| Program Memory | 1MBytes |
| Data Storage | 1MBytes |
| Power-down Protection Area | 3KBytes |
| RTC: | Not Supported |
| Maximum Expansion Module | 32 |
| Modbus Master Max Channel Numbers | 10 |
| Modbus Master Command Max Length: | |
| Function Code 1(Read Coils) | 2000 |
| Function Code 2(Read Discrete Inputs) | 2000 |
| Function Code 3(Read Holding Registers) | 125 |
| Function Code 4(Read Input Registers): | 125 |
| Function Code 15(Write Multiple Coils) | 440 |
| Function Code 16(Write Multiple Registers) | 27 |
| Function Code 23(Read/Write Multiple Registers) | 25+25 |
| Interface Parameters | |
| Interface | 2 * RJ45 & 1 * RS485 |
| Network Port Baud Rate | 10/100Mbps, Adaptive and full duplex |
| Network Protocol | Modbus TCP,the default IP of the device is 192.168.0.15 |
| Serial Port Configuration(RS485) | Supports Modbus RTU/ASCII, the baud rate is 2400~115200bps, and supports the parameter configuration of parity code and stop bit |
| LED indicator | 6 LEDs PWR STAT RUN NET IRN IER |
| Link Parameters | |
| Modbus TCP Client | Max supports for connecting 6 Modbus TCP servers |
| Modbus TCP Server | Max supports for 6 Modbus TCP clients connected |
| Modbus RTU Master | Max supports for connecting 5 slave devices |
| Modbus RTU Slave | Max supports for connecting 1 master device |
![Supmeter High Accuracy 20mA 0-10V Load Cell Weighing Transmitter Indicator Controller with RS485 RS232 Modbus RTU Bst106-M60s[L]](https://img.china-sups.com/8a2f9675ae980510cffc38b4600dadc4.jpg)
